User manual

0150-0296A 52 Vista Columbus Triplex CDR
q Main Menu → Telemetry → Telemetry Enable
Use this menu to Enable or Disable telemetry of
each camera individually.
Telemetry EnableTelemetry Enable
[CANCEL] [OK]
Camera 01:
Camera 02: Enable
Camera 03: Disable
Camera 04: Enable
:
:
Camera 16: Enable
Disable
q Main Menu → Telemetry → Telemetry
Use this menu to select the telemetry signal type. Select
from either:
Legacy: Asynchronous, not synchronized with the video
signal. This is the older style.
Current
Legacy
Current: Synchronous, synchronized with the video signal. This is the newer style.
Legacy telemetry may interfere with some on-screen displays. If this happens, try using Current
telemetry. Current works with Baxall ZR-mini receivers or DAX units. Changing the telemetry type is a
global function, which changes all telemetry outputs.
q Main Menu → Telemetry → Preset Mode
Select either Legacy or Current. Current mode is
only available on ZRX-mini receivers
manufactured after February 1996.
Current
Legacy
Legacy Mode Procedure
1. Press the Telemetry button to enter the telemetry mode.
2. Press and release the Function button, then press the Preset button.
3. Pan and Tilt the camera to the desired position.
4. Press the Iris Open button to store the position.
5. Toggle the Lights button On and Off to advance to the next preset.
6. Repeat the previous 5 steps for each of the eight presets, or exit by switching Camera Power Off.
7. When all presets are stored, press the Telemetry button to exit the telemetry mode.