User manual

0150-0296A 40 Vista Columbus Triplex CDR

Disk Test Result

[OK] [OK]

Disk Test Success

Disk Failure

Disk 1:Write Error

Disk 2:Write Error

PASSED

FAILED

Press the Enter button to clear from the display.

Should a disk test fail, several actions will performed:

• An icon will be displayed indicating disk failure. It is displayed on Monitor A on the bottom of the

screen in the middle. This icon will only disappear when the disk is replaced.

• If the Notify Alarm or Notify Record email option is enabled in the Email Notification Setup Screen,

an email will be sent indicating that a disk failure occurred.

q Main Menu → Record → Record Lock

Use this menu to set the Record Lock feature. This feature disables the front panel

record button. Setting Record Lock to ON will start the unit recording if it is not currently

in the Record mode.

q Main Menu → Record → ADM (Auto Delete Mode)

The ADM feature prevents the unit from displaying or archiving any search results that are older than a

specified number of days. This feature may be required by law in some jurisdictions. If required by local

authorities, the ADM feature must be turned On by selecting between 1 and 99 days. Typically this

feature is turned Off.

ADM will change. Are you sure?

Message

ADM Setting

99 Days

Yes

OFF