User manual

0150-0296A 27 Vista Columbus Triplex CDR
Sequenced Full Screen Display
While in a Full Screen display, press the Sequence button to begin full
screen sequencing. The sequence list is programmable. For detailed
information about programming the sequence list see section 2.8.
Sequence Button
Zooming
To activate the 2x digital zoom, select the full screen display of the camera
you wish to zoom, then press the Zoom button. Zooming will be indicated by
the LED located directly above the Zoom button. Zooming is also indicated
as ZOOM on the monitor. Zooming works with frozen and non-frozen
images. Zoomed images can also be frozen.
While Zoomed, use the Jog/Shuttle to Pan and Tilt across the image.
Please note, the camera does not move during digital Pan/Tilt.
Press the Zoom button again, or another camera button to cancel the Zoom
operations.
Zoom Button
with LED
If the Zoom button is pressed while in a multiscreen display, the camera from the last active
cameo is selected for full screen display. Press the Zoom button again to activate the Zoom
operation.
2.11 The Print Image Button
Pressing the Print Image button will print the currently displayed image. If a
4-way multiscreen is the display mode, the Vista Columbus Triplex CDR will
switch to a single image display of the last selected fullscreen camera, freeze
the image, and send to the default printer.
Print Image Button
Printer Setup
The following equipment and conditions are required for the operation of the Print Image button.
Equipment
HP DeskJet 3820
Hawking Print Server PN7127P
Conditions
The Printer and Print Server must be connected to the same local network as the Vista Columbus
Triplex CDR.
The Vista Columbus Triplex CDR must know the Print Servers IP address. The IP address can be
input under Main Menu – Communications – Ethernet – Ethernet Settings (See Section 3.18).
The Printer and Print Server must be On-line and Operational.
NOTE