User manual

0150-0296A 17 Vista Columbus Triplex CDR
Sequenced Full Screen Display
While in a Full Screen display, press the Sequence button to begin full
screen sequencing. The sequence list is programmable. For detailed
information about programming the sequence list see section 2.8.
Sequence Button
Zooming
To activate the 2x digital zoom, select the full screen display of the camera
you wish to zoom, then press the Zoom button. Zooming will be indicated by
the LED located directly above the Zoom button. Zooming is also indicated
as ZOOM on the primary monitor. Zooming works with frozen and non-frozen
images. Zoomed images can also be frozen.
While Zoomed, rotate the Jog/Shuttle to Pan and Tilt across the image.
Please note, the camera does not move during digital Pan/Tilt.
Press the Zoom button again to cancel the Zoom operations.
Zoom Button
with LED
Freezing
Pressing the Freeze button freezes all camera images on-screen. Full
Screen freezing is indicated as FRZ on-screen. Multiscreen freezing is
indicated as
*
(a flashing asterisk) in each frozen cameo.
Individual cameos can be frozen in Active Cameo mode (see section 2.7).
Press the Freeze button again or any camera button to cancel Freeze
operations.
Freeze Button
Selecting Monitor-B
B
A
To control Monitor-B, press the Monitor B selection button. The Monitor-B
LED will light to indicate that the number keypad now controls Monitor-B.
Press the Monitor A button to return the keypad control to Monitor-A.
Monitor A, B Buttons
The Record CD Button and Live Viewing
Pressing the Record CD button while viewing live video will cause the
Archive Incident screen to appear. The unit takes the latest recording as its
stop time and fits as much of the previous recording as the CD will hold. The
time and size of the archived video can be adjusted by various amounts
depending on where on the Hard Disk the data lies.
Record CD Button
2.4 Playback
Playback always displays on Monitor A. Playback multiscreen borders are black, as opposed to the
grey borders of the live multiscreens. Monitor B continues to display live full screen images in
playback mode. To begin playback, press the Play Forward or Reverse Play button.
Play Forward
When the Play Forward button is pressed, the unit will play forward at the rate
the data was recorded. While in Playback mode, the user may change the
playback direction, playback speed, etc. To return to Play Forward operations,
press the Play Forward button.
Play Forward
Button
If the Zoom button is pressed while in a multiscreen display, the camera from the last active
cameo is selected for full screen display. Press the Zoom button again to activate the Zoom
operation.
NOTE