Installation Guide

10
Troubleshooting
Problems
Possible Causes
Solutions
No power.
□ A fuse may be blown or the circuit breaker
tripped.
□ Plug not fully inserted into the wall outlet.
Check both causes and plug in
again.
Internal temperature not cold
enough.
□ Temperature setting is too warm.
□ The door is not shut properly or opened
excessively.
□ Recently added a large quantity of warm
food to the cabinet.
□ Close proximity to heat source or direct
sunlight.
□ Ambient temperature or humidity is very
high.
Check all causes and improve
accordingly.
Refrigerator runs
continuously.
□ Temperature setting is too cold.
□ The door is not shut properly or opened
excessively.
□ Recently added a large quantity of warm
food to the cabinet.
□ Close proximity to heat source or direct
sunlight.
□ Ambient temperature or humidity is very
high.
Check all causes and improve
accordingly.
Refrigerator makes a gurgling
noise when operating.
□ This noise is completely normal. The
refrigerant inside the appliance will make a
gurgling noise as it changes from a liquid to
a gas and back again.
/
What are the standard
wattage and amps used?
/
This information can be found on
the rating plate located on the back
of the cabinet.
How much does it cost to run
the freezer?
/
Please refer to the energy guide.
Can I use an extension cord?
/
No, an extension cord may not be
used.
I had my fridge on its side to
bring it home. Do I have to let
it sit? And for how long?
/
Yes, please allow it to sit upright
for 6 hours before plugging it in.
How do I set the temperature?
/
If your thermostat dial has dots.
The smaller dots indicate warmer
temperatures and the larger dots
indicate colder temperatures.