Use and Care Manual

Operation Instruction
1. Setting The Clock
This is 12 and 24 hour clock, and you can select
which by pressing CLOCK pad. During cooking, the
current time can be seen by touching CLOCK pad.
EXAMPLE: How to set the oven clock time at 8:30.
1) In standby mode, touch CLOCK pad once to select
12 hour clock.
2) Use the number pads to enter the time (touch
number pads 8,3,0 in order to enter 8:30).
3) Press START/+30SEC to confirm.
2. Setting The Kitchen Timer
In standby state or during cooking, touch TIMER
pad to set kitchen timer.
Example: How to set 30 minutes timer.
1. Touch TIMER pad once.
2. Use the number pads to enter time. The longest
time is 99 minutes 99 seconds.
3. Touch START/+ 30 SEC pad to start.
3. Start/ Add 30 SEC
1) Touch once and cooking will start at full power
level immediately for 30 seconds. Touching this
button repeatedly will add 30 seconds each time.
2) During the time cook and time defrost, you can
add 30 seconds for each push.
This function will not work for auto cooking menus
and defrost program.
4. Cooking Program
1) Touch the TIME COOK pad.
2) Touch the number pad to enter desired cooking
time.
The maximum number that can be entered is 99
min. 99 sec.
3) Touch the POWER LEVEL pad.
4) Use the number pads to enter the power level
as shown in the table below.
5) Touch START/+30 SEC pad to start.
7
HOMEDEPOT.COM Please contact 1-855-847-7264
for further assistance
Power Level Chart:
NOTE:
The TIMER function can be used in any cooking
process. You can check the countdown time by
pressing TIMER pad, but if STOP/CLEAR pad is
pressed when the display shows the time, the
function is cancelled.
Power Level Display
100%
PL10
90%
PL-9
80% PL-8
70%
PL-7
60%
PL-6
50%
PL-5
40% PL-4
30% PL-3
20% PL-2
10% PL-1
DisplayPower Level
NOTE:
You can check the power level by
pressing Power Level pad during
cooking.