Use and Care Manual

3
5
Removing The HEPA Filter
□
□
Grab the HEPA lter's tag and pull it towards you.
Replace with a new HEPA lter.
6
Putting All Filters Back
□
7
Reattaching The Back Cover
□
□
To reattach the bac k cover , ins ert the bottom
hooks into the bottom of the appliance rst.
Push the back cover against the body of the
appliance.
8
Resetting Filter Lifetime
□
□
□
Put the plug in the wall socket.
Press to switch on the appliance again.
Press and hold for 3 seconds. The light will turn
off, indicating that the reset is complete.
HEPA lter
Back Cov er
□
□
□
When using the air purifier in an environment of heavy pollution, the lifespan of the air filter may be significantly reduced.
You can change the filters even if does not light up. Follow the steps below to perform a hard reset.
Replace the air filters as mentioned in the Filter Replacement section.
Plug in the air purifier and keep in working mode.
Press and hold for 3 seconds, after hearing the buzzer "Ding", the indicator will turn off. The reset is
nished.
FILTER REPLACEMENT FORCE MODE
1x Removable Pre-lter
1x HEPA Filter
PACKAGE CONTENT
Removable
Pre-lter
HEPA lter
Washable
Pre-lter
Put HEPA lter, removable pre-lter, and washable
pre-lter back into the appliance.
NOTE: Even you replace the new lters, when
you switch on the appliance, the light of lter icon
still ash, you need to reset the lter lifetime.
HOMEDEPOT.COM
Please contact 1-855-847-7264 for further assistance.