6 BOTTLE THERMOELECTRIC WINE COOLER INSTRUCTION MANUAL Model No.: MVWC6B To ensure proper use of this appliance and your safety, please read the following instructions completely before operating this appliance.
TABLE OF CONTENTS NAMES OF THE PARTS……………………………………………………… 2 IMPORTANT SAFETY INSTRUCTIONS……………………………………. 3 INSTALLATION INSTRUCTIONS BEFORE USING YOUR WINE COOLER……………………..…… 3 INSTALLING YOUR WINE COOLER ……………………………… 3 ELECTRICAL CONNECTION………………………………………… 4 OPERATING YOUR WINE COOLER TEMPERATURE CONTROL………………………………………….. 5 CARE AND MAINTENANCE CLEANING YOUR WINE COOLER………………………………… 6 VACATION TIME………………………………………………………. 6 MOVING YOUR WINE COOLER…………………………………… 6 ENERGY SAVING TIPS……………………………………………….
NAMES OF THE PARTS MODEL NO. MVWC6B 1. RACKS 2. HINGE 3. RECESSED HANDLE 4. LEVELING LEGS 5. TEMPERATURE SENSOR 6. TEMPERATURE ADJUST KNOB 7. LIGHT 8.
IMPORTANT SAFETY INSTRUCTIONS aWARNINGa • • • To reduce the risk of fire, electrical shock, or injury when using your wine cooler, follow these basic precautions: Read all instructions before using the wine cooler. Never clean wine cooler parts with flammable fluids. The fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other wine cooler. The fumes can create a fire hazard or an explosion.
Electrical Connection aWARNINGa Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center. This wine cooler should be properly grounded for your safety. The power cord of this wine cooler is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.
OPERATING YOUR WINE COOLER - LIGHT BUTTON: To manually illuminate/extinguish the interior light - TEMPERATURE ADJUSTING KNOB ( HIGH ): Increase Temperature - TEMPERATURE ADJUSTING KNOB ( LOW ): Decrease Temperature Temperature Control The lead-time to achieve the pre-set temperature depends on the nature and quantity of the object placed inside the cavity. The temperature range can be set as low as 46°F or as high as 66°F to suit your specific storage requirements.
CARE AND MAINTENANCE Cleaning Your Wine cooler • • • • • • • • • Upon installation of your new appliance, it is recommended that it be cleaned thoroughly. Unplug the unit from the wall outlet. Remove all contents. Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash the racks with a mild detergent solution.
TROUBLESHOOTING GUIDE You can solve many common wine cooler problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service. PROBLEM Wine cooler does not operate. POSSIBLE CAUSE Not plugged in. Make sure the wall socket is functional by testing another electrical appliance in the power socket. The circuit breaker tripped or a blown fuse. Door is kept open too long or is opened too frequently.
The door will not close properly. The wine cooler is not on a level surface. The gasket is dirty. The racks are out of position This is simply a function of the cooling system. The lower the temperature setting, the more the fan will run. If the room is warmer than 77°F (25°C), it will run more. This wine cooler features a self-evaporation system. An external drip tray is therefore not required for accumulating condensation.
Wine Cooler Warranty MC Appliance Corporation warrants each new Wine cooler to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase. A copy of the dated sales receipt / invoice is required to receive warranty service or a refund.
