Pr-Instaliation PLACEMENT no Before use, remove all packing materials, including bottom cushions, foam pads and tapes Inside of the refrigerator; star off the protective film on the doors and the refrigerator body. c © Keep sway from heat and avoid direct sunlight.
Pr-Installation LEVELING FEET Schematic diagram of the leveling feet. Adjusting procedures: a. Turn the fast clockwise io raise the refrigerator; B. Tum the fast counterclockwise io lower the refrigerator; ©. Adjust the right and lef fut based on the procedures above to 2 horizontal level.
Pr-Installation 1 WARMING: Unplug the redundant rom lis inflectional cumuli. Fervently adi door afterlives. uw Remove the hole cover and the right top hinge cover, then unscrew screws and remove the right dep hinge. Neap the screws to reuse. o Lift the freezer door up and away from your refrigerator. 2 oO Unscrew screws of middle hings, remove the hings, than it the refrigerator door up and away from your refrigerator. Eve the screws to reuse.
Pr-Installation 3 4 0 Unscrew screws of the bottom hings, then remove the o Remove the sleeves from the top right of doors and hole cap Bottom hinge from the bottom right side of the from top left of doors, and assemble them on the opposite refrigerator. sides. © Unscrew he hinge shaft from the right lade of the bosom oi Remove the refrigerator door open bottom stopper snd hings and mows # to the lat SIDS, then secure the bosom install it other side of the door.
Pr-Installation 5 6 0 install the refrigerator door vertically onto the bottom 0 Install the freezer door vertically Into the center hinge. Take hinge. Take out the middies left hinge from the accessory out the left top hinge and loft lop hinge cover farm bag then assemble the midi (efi hinge on tha lef side cassowary bag, assembly left top hinge, loft top hings cover of the refrigerate. and hols cover.
Pr-Installation INSTALLING THE DOOR HANDLE o Parts included with the handle kit: Handle assembly Screws (4) Allen wrench Allen wrench Allen wrench caps (4) sorrows (4) You will need: A Phillips screwdriver and the Included Allen wrench. 1. Insert the two Phipps-head screws itn the refrigerator door on the side you prefer, then tighten, 2. Mig the door handle with the screws. 3, Parting the two Allen-head screws through tha side of the door handle and Hygiene with the Allen wrench. 4.
