Installation Guide

□
Before using the freezer, remove all packaging materials including boom cushions and foam pads and tapes
inside the freezer, tear off the protecve film on the door and the freezer body.
□
The freezer should be placed in a well-venlated indoor place; the ground shall be flat, and sturdy.
□
Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust
or reducon of insulang effect.
□
The top space of the freezer shall be greater than 70cm, and the distances from both sides and backside shall be
more than 20cm to facilitate heat dissipaon.
□
The freezer shall stay for half an hour before connecng power when it is firstly started.
The freezer shall run 2 to 3 hours before loading fresh or frozen foods; the freezer shall run for more than 4 hours
in summer in advance considering that the ambient temperature is high.
Placement
START TO USE
□