Use and Care Manual

EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
• Press Favorite 3 times; screen displays 3.
• Press Microwave, then press "5", "0" and "0" to set first stage cook time.
• Press Power Level once, then press "8" to choose 80% first stage cooking power.
• Press Micro again, then press "1", "0", "0" and "0" to set second stage cook time
• Press Power Level again, then press "6" to choose 60% second stage cooking power.
• Press START/+30Sec. to immediately start multi-stage cooking.
• To choose the procedure from the memory list, press Favorite three times. Screen
will display "3"; press START/+30Sec. to run procedure.
wave
EN-21
18. INQUIRING FUNCTION
a. When oven is cooking, press Timer/Clock for the time of day to appear for three
seconds in the display.
b. When oven is cooking, press Conveciton or Power Level pads for cooking power to
appear for three seconds in the display.
If you do not want to save a particular multi-stage program as a procedure,
do not press Favorite as the first step. Press START/+30Sec. after
programming both stages.
Note：
It is default that the buzzer sounds is open.In waiting state, long pressing on number
8 for 3 seconds, it sounds a long beep, turns off the sound.
When the sounds turn off, long pressing on 8 f or 3 seconds, it sounds a long beep
and the sound turn on.
Note: All models has mute function and energy-saved function.
This function can work under lock function too.
19. TURN ON/OFF THE BUZZER SOUND
a. In standby mode, press the " STOP/Cancel " once (less than 3 seconds to avoid
starting the child lock function ) to enter the Energy Saver mode.
b. In child-locked mode, press the " STOP/Cancel " once (less than 3 seconds) and
release to enter the Energy Saver Mode .
c. Above operation is the only way to start the Energy Saver mode.
d. The Energy Saver mode works only if the door is closed.
20. ENERGY SAVER MODE
Auto Menu and Preheat cannot be set in Multi-stage Cooking.
NOTE：