Installation Guide

Remove all packing material and accessories. Examine the oven for any damage

such as dents or broken door. Do not install if oven is damaged.

surface. Do not remove the light brown Mica cover that is attached to the oven

Cabinet: Remove any protective film found on the microwave oven cabinet

cavity to protect the magnetron.

INSTALLATION

1. Select a level surface that provide enough open space for the intake and/or

outlet vents.

12 inches(30cm )

OPEN

3.0 inches (7.5cm)

A minimum clearance of 3.0 inches (7.5cm) is required between the oven and

any adjacent walls. One side must be open.

a. Leave a minimum clearance of 12 inches (30cm) above the oven.

b. Do not remove the legs from the bottom of the oven.

c. Blocking the intake and/or outlet openings can damage the oven.

d. Place the oven as far away from radios and TV a s possible.

Operation of microwave oven may cause interference to your radio or TV

reception.

EN-10

>3.0ft(91.6cm)

The minimun installation height is 3.0ft(91.6cm)

PAGE 1
Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron. INSTALLATION 1. Select a level surface that provide enough open space for the intake and/or outlet vents. 12 inches(30cm ) 3.0 inches (7.5cm) OPEN 3.0 inches (7.5cm) >3.0ft(91.