User guide

USER SETTINGS
D-302990 23
Enabling the Squawk Option
You can determine that the system will activate (or
not activate) high/mid/low wireless siren sound, for a
short time, upon arming (1 beep) and disarming (2
beeps), by keyfob only.
Having entered your Master User Code
successfully
(see above - Entering the User Settings Menu), click
the button (repeatedly, if necessary) until
the display will read:
SQUAWK OPTION
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
squawk disable
OKI
(if this is the current option)
squawk low volume
If not satisfied -
squawk mid volume
If not satisfied -
squawk hi volume
If not satisfied
squawk hi volume
If satisfied
OKI
For wireless siren, refer to "low", "mid" and "hi"
options as "squawk enable".
You
may now select any other item on the USERS
SETTINGS menu or quit the programming process by
clicking . When "<OK> TO EXIT" is displayed,
click
OKI
.
Setting Time and Time Format
Having entered your Master User Code successfully
(see Entering the User Settings Menu, above), click
until the display reads:
SET TIME&FORMAT
A. If 12h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
US FORMAT - 12H
OKI
(if this is the current option)
TIME _ _ : _ _ A
OKI
TIME 12:55A
(time
digits] (e.g.
12:55A)
TIME HH:MM A
OKI
Note: To enter “A” - press [  ] or to enter “P” - press [#].
B. If 24h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
US FORMAT - 12H
OKI
EU FORMAT - 24H
TIME _ _ : _ _
OKI
TIME 19:55
[time
digits] (e.g.
19:55)
TIME 19:55
OKI
TIME HH:MM
OKI
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
OKI
.
Setting the Date and Date Format
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until the
display will read SET DATE&FORMAT.
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
DATE MM/DD/YYYY
OKI
DATE DD/MM/YYYY
If not satisfied
press
DATE _ _ / _ _ /_ _ _ _
OKI
DATE 01/01/2002 [Enter date] (e.g.
01/01/2002)
DATE 01/01/2002
OKI
DATE DD/MM/YYYY
OKI
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
OKI
.