User guide

USER SETTINGS
22 D-302990
Notes: (1) Functions inside black rectangles are accessible only if master user code was entered.
(2) For the year, enter the two last digits only.
(3) Press
OK
I
to display the number, state and name of first bypassed zone. Press repeatedly to view all the bypassed zones.
(4) To enter "A" (AM) press
(or one of the 3 keys above it), to enter "P" (PM) press (or one of the 3 keys above it).
(5) SET/SHOW/RECALL BYPASS menus are accessible only if "manual bypass has been selected by the installer.

Moving forward
Moving backward
Moving one level
up in the menu
Return to
“<OK> TO EXIT”
To move within
most of
the menus, the following
keys can be used:
Show / confirm
data
 
SET DATE&FORMAT

SCHEDULER

PGM
(See figure 8)
SUNDAY
MONDAY TUESDAY WEDNESDAY FRIDAY SATURDAY DAILY
 
start - HH:MM
stop - HH:MM
or
TIME - - / - -
(enter start/stop time)

Notes
1. Select time in 10 minute interval only.
2. To erase a displayed time, press OFF.


OPERATION No. 1 OPERATION No. 2 OPERATION No. 3 OPERATION No. 4
THURSDAY
OKI
OKI OKI OKI OKI OKI OKI OKI OKI
OKI OKI OKI OKI
OKI
OKI
OKI
OKI
OK
I
Figure 8 Detail "A" – Sheduler Function
Automatic Arming Option
You can determine that the system will be automatically
armed at any desired time.
Having entered master user code successfully, click
until AUTO ARM OPTION is displayed.
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
enable autoarm
OKI
(if this is the current option)
disable autoarm
If not satisfied
press
disable autoarm
OKI
AUTO ARM OPTION
OKI
You may now select any other item on USERS
SETTINGS menu or quit programming process by
clicking
. When "<OK> TO EXIT" is
displayed, click
OKI
.
Setting Arming Time
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until the
display will read:
AUTO ARM TIME
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
arm time_ _ : _ _ A
OKI
arm time 12:55 A
[time
digits] (e.g.
12:55 A)
arm time 12:55 A
AUTO ARM TIME
OKI
Notes:
1. For 12h/24h time format selection, refer to
Setting Time and Time Format below.
2. Press "" to enter A (AM), or press "#" to enter P
(PM).