User guide

SPECIAL FUNCTIONS
D-302990 15
B. Executable Commands
Command Keying Sequence
Disarming []

[1]

[#]
Arming Home []

[2]

[#]
Arming Home-Instant
[]

[2]
[
1]

[#]
Arming Away
[]

[3]

[#]
Arming Away-Instant
[]

[3]

[1]

[#]
Arming Away-Latchkey
[]

[4]

[#]
Arming Away-Instant-
Latchkey
[]

[4]
[
1]

[#]
Turn PGM ON []

[5]
[
00]
[1]
[#]
Turn PGM OFF []

[5]
[
00]
[0]
[#]
Quit (end communication) []

[9]

[9]

[#]
Reporting to Private Telephone
control
panel
The PowerMaxExpress can be programmed by the
installer for selective transmission of messages to
private telephone subscribers.
The following siren signal will be sent to private
telephone upon event reporting:
* FIRE: ON - ON - ON - pause.... (- - - - - - ......).
** BURGLAR: ON continuously (
...)
*** EMERGENCY: 2-tone siren; like an ambulance.
The called party must acknowledge the message (as
explained later on), but if he does not respond, the
message will be transmitted repeatedly as many
times as possible within a 45-second time limit.
When the 45 seconds are up, the PowerMaxExpress
will disengage the line and call the next private
telephone number on its list.
The called party can acknowledge the message by
pressing the "2" key on the telephone keypad. As a
result, the PowerMaxExpress will disengage the line
and consider the event duly reported.
Remote Control by SMS
PowerMaxExpress system with GSM unit can
respond to SMS commands from any cellular
telephone.
The various SMS commands are detailed in the
following table (the detailed SMS message sending
process is described in the cellular telephone user’s
guide). In this table, “<code>” means 4-digit user
code and blank space simply means blank space.
SMS Command List
Command SMS Format
1 Arm AWAY
“AWAY <code>”
or
“AW <code>”
2 Arm AWAY instant
“AWAY INST <code>”
or
“AWI <code>”
3 Arm AWAY Latchkey
“LATCHKEY <code>”
or
“LK <code>”
4 Arm AWAY Latchkey
instant
“LATCHKEY INST
<code>”
or
“LKI <code>”
5 Arm HOME
“HOME <code>”
or
“HM <code>”
6 Arm HOME instant
“HOME INST <code>”
or
“HMI <code>”
7 Disarm
“DISARM <code>”
or
“DA <code>”
8 Turn PGM ON "PGM ON <code>"
9 Turn PGM OFF "PGM OFF <code>"
12 Define custom house
identity (see note)
“HOUSE NAME <code>
<house ID>”
or
“HN <code> <house ID>”
13 Query system status “STATUS <code>”
or
“ST <code>”
Note: House ID includes up to 16 characters, for
example JOHN'S HOUSE.
Reporting by SMS
The PowerMaxExpress system can send SMS
messages to a maximum of 4 pre-selected telephone
numbers.
Example of the reported SMS messages:
• JOHN’S HOME
**AWAY**
• JOHN’S HOME
**DISARM**
• JOHN’S HOUSE
POWERMAX: LOW BATTERY
GARAGE: LOW BATTERY
• JOHN’S HOUSE
STATUS MESSAGE 01
(Event list is displayed)