User guide
6 DE5450P PowerMax Programming Guide
5 . 2 4 h s i l e n t
F. Click <OK> once more to confirm. The “Happy Tune”
will sound, and your selection will be memorized. The
display will then change to:
Z 0 7 : N A M E _
G. At this point, enter the serial number of the zone name
you wish to attach to zone No. 7 from the list of 29
available names (see list in Figure 3).
Note: If you click <OK> without entering a number, the
display will show the current name of the selected zone,
with a dark box at the far right. You may then review all
names by clicking <NEXT> repeatedly.
H. If you enter a number (say 13), the display will read:
F r o n t d o o r
I. Click <OK> to accept this name - a dark box will appear
at the far right. Click <OK> again to confirm. The
“Happy Tune” will sound, your selection will be saved
and the display will change to:
Z 0 7 : C H I M E
J. Click <OK>. You are about to determine whether this
zone will be a chime zone or not. The display will read:
c h i m e o n
or: chime off
You can toggle the display between CHIME ON and
CHIME OFF by clicking <NEXT>.
K. Click <OK> once if you approve the already selected
option - the “Happy Tune” will sound. Alternatively, click
<OK> twice while the other option is viewed. The
“Happy Tune” will sound and the display will revert to:
Z o n e N o . 0 7
L. From this point on, you may continue in several different
directions:
- Click <NEXT> to go up (8
9
10.....)
- Click <BACK> to go down (6
5
4.....)
Repeat Steps C through K above for
all other zones that you plan to use.
• To return to the main menu, click
<AWAY>. This will get you back to:
< O K > T O E X I T
You may now review and select any other
mode on the installer’s menu (by clicking
<NEXT> or <BACK>).
DEFAULT AND PROGRAMMED ZONE DEFINITIONS
Zone Type Zone Name
Default Programmed Default Programmed
1 Delay 1 Front door
2 Delay 1 Garage
3 Delay 2 Garage door
4 Perimeter Back door
5 Perimeter Child room
6 Interior Office
7 Interior Dining room
8 Perimeter Dining room
9 Perimeter Kitchen
10 Perimeter Living Room
11 Interior Living Room
12 Interior Bedroom
13 Perimeter Bedroom
14 Perimeter Guest Room
15 Interior Master Bedroom
16 Perimeter Master Bedroom
17 Perimeter Laundry room
18 Perimeter Master Bathroom
19 Perimeter Basement
20 Fire Fire
21 Fire Fire
22 Emergency Emergency
23 Emergency Emergency
24 24 h / silent Basement
25 24 h / silent Office
26 24 h / audible Attic
27 24 h / audible Den
28 non-alarm Yard
29 non-alarm Hall
30 non-alarm Utility room
* Note: All zones are non-chime by default. Enter your own choice in the last column and program accordingly.
Zone No.
Chime Y/N? *