User guide

Chapter 6: Data Details Tables
44 DE5450S Remote Programmer Guide Rev. 9
Figure 6-6: Pre-Enroll Dialog Box
4. Click the Send to Panel button and then click Close.
5. Click the UL Table icon .
To Complete the Enrolling Procedure
6. Stand near the PowerMaster panel. Press and hold the button
(for PB-101) or the left button (for PB-102) until the orange LED
turns on, and then release the button. Ensure that the LED stays on
for 2 seconds and then flashes for 10 seconds.
7. Click the UL Table icon .
8. To view the pendant’s RSSI, click OK in the dialog box that opens.
9. Make sure that “Activated” now appears in the Enrolled column.
To Perform a Periodic Test
1. Click the Periodic Test icon on the toolbar.
2. Press the button (for PB-101) or the left button (for PB-
102).
3. Make sure that “Tested” now appears in the Walk Test column.