User guide
Chapter 6: Data Details Tables
DE5450S Remote Programmer Guide Rev. 9 43
To Perform a Periodic Test
1. Click the Periodic Test icon on the toolbar.
2. Press any key on the keypad.
3. Make sure that “Tested” now appears in the Walk Test column.
To Delete a Keypad
1. In the Keypad Enrollment table, click the Action button of the
keypad to be deleted.
2. From the dialog box, select the Delete Device radio button.
3. Click the Send to Panel button.
4. A new dialog box opens asking Are you sure?; click Yes.
5. Click Close.
The keypad is now deleted from the system.
6.18 Pendant Enrollment
Pendants, such as PB-101 PG2 and PB-102 PG2 are small two-way pendants
used for arming/disarming and for sending a Panic message. The table displays
information about all installed pendants and their enrollment status. The data also
includes the pendant number and RF ID, received signal strength indication (24-
hour and current RSSI) quality of the device (Strong; Good; Poor; or Not OK),
device configuration and walk-test.
The Remote Programmer enables pre-enrolling and deleting pendants.
To Pre-enroll a Pendant on the Remote Programmer
1. Login to the Remoter Programmer.
2. In the Pendant Enrollment table, click an “Unregistered” Action button .
3. In the dialog box that opens, make sure the Add Device radio button is
selected and enter the pendant ID.