User guide
Chapter 6: Data Details Tables
38 DE5450S Remote Programmer Guide Rev. 9
Figure 6-4: Pre-Enroll Dialog Box
4. Click the Send to Panel button and then click Close.
5. Click the UL Table icon .
To Complete the Enrolling Procedure
6. Stand near the PowerMaster panel. Press and hold the enroll button
of the repeater until the orange LED turns on, and then release the
button. Ensure that the LED stays on for 2 seconds and then flashes
for 10 seconds.
7. Click the UL Table icon .
8. To view the repeater’s RSSI, click OK in the dialog box that opens.
9. Make sure that “Activated” now appears in the Enrolled column.
To Perform a Periodic Test
1. Click the Periodic Test icon on the toolbar.
2. Press the self-test button on the repeater once and release it.
3. Make sure that “Tested” now appears in the Walk Test column.