User guide

Chapter 6: Data Details Tables
36 DE5450S Remote Programmer Guide Rev. 9
To Pre-enroll a Keyfob on the Remote Programmer
1. Login to the Remoter Programmer.
2. In the Keyfob Enrollment table, click an “Unregistered” Action button .
3. In the dialog box that opens, make sure the Add Device radio button is
selected and enter the keyfob ID.
Figure 6-3: Pre-Enroll Dialog Box
4. Click the Send to Panel button and then click Close.
5. Click the UL Table icon .
To Complete the Enrolling Procedure
6. Stand near the PowerMaster panel. Press and hold the AUX button until
the orange LED turns on, and then release the button. Ensure that the
LED stays on for 2 seconds and then flashes for 10 seconds.
7. Click the UL Table icon .
8. To view the keyfob’s RSSI, click OK in the dialog box that opens.
9. Make sure that “Activated” now appears in the Enrolled column.