User guide

Chapter 6: Data Details Tables
32 DE5450S Remote Programmer Guide Rev. 9
To Complete the Enrolling Procedure
6. Stand near the PowerMaster panel. Press and hold the enroll
button of the device until the orange LED turns on, and then release
the button. Ensure that the LED stays on for 2 seconds and then
flashes for 10 seconds.
7. Click the UL Table icon .
8. To view the zone’s RSSI, click OK in the dialog box that opens.
9. Make sure that “Activated” now appears in the Enrolled column.
To Perform a Periodic Test
1. Click the Periodic Test icon on the toolbar.
2. Press the tamper switch of the device once and release it.
3. Make sure that “Tested” now appears in the Walk Test column.
To Delete a Zone
1. In the Zone Enrollment table, click the Action button of the zone
to be deleted.
2. From the dialog box, select the Delete Device radio button.
3. Click the Send to Panel button.
4. A new dialog box opens asking Are you sure?; click Yes.
5. Click Close.
The zone is now deleted from the system.
6.12 Siren Enrollment
A siren is a two-way wireless unit which emits a loud siren and flashes a
bright light in the event of a burglary.
This table displays information about all installed sirens and their enrollment status.
For PowerG installations, the data also includes the siren number and RF ID, the
siren type, received signal strength indication (24-hour and current RSSI) quality of
the device (Strong; Good; Poor; or Not OK), device configuration and walk-test.