User guide

Chapter 2: Getting Started
DE5450S Remote Programmer Guide Rev. 9 3
Chapter 2: Getting Started
2.1 Hardware / Software Requirements
In order to run Remote Programmer, you need the following resources:
· PC (2GHz or higher)
· Microsoft® Windows® 7, 8 or XP.
· 1GB RAM
· At least 20 MB of free disk space.
· For best performance, use a display driver with a resolution of at least 1024 x
768 pixels.
2.2 Installation
Install an internal modem in the computer, or use an RS-232 cable to connect an
external modem to one of the computer’s COM ports as instructed in the manual
supplied with the modem. Then connect the modem to the telephone line. The
modems suitable for use with Remote Programmer are listed in the Modem field in
the Communications tab of the Options window (refer to 7.1.2 Remote Connection).
To Install Remote Programmer
Attention: If an older version of the Remote Programmer software is already
installed on your PC, uninstall it before installing the new software version.
1. Start Windows. Close all running applications, if any.
2. Insert the Remote Programmer DVD into the DVD drive.
If your system includes the AutoPlay feature, the setup program starts
automatically. Otherwise, proceed as follows:
3. From the Start menu, select Run; the Run dialog box appears.
4. In the Run edit box, type the drive letter of the DVD drive you are using,
followed by a colon, backslash, and the word “setup”, for example:
"d:\setup".
5. Click OK. The installation welcome screen appears and the Installation
program guides you through the entire process.
6. Click Next, then follow the instructions on your screen to complete the
installation.
7. Restart your computer when the Installation wizard prompts you to do so.
During installation a PowerMax/PowerMaster shortcut icon is placed
on the Desktop to enable you to start Remote Programmer easily.