User guide

SECURING THE PROTECTED SITE
DE5468U 13
When the system is disarmed, after presenting a
valid proximity tag to the control panel, the message
"<OK> for AWAY" is displayed. Now you can press
the
button to immediately arm the control
panel, or wait for 3 second for system automatic
AWAY arming (the message "Please exit now" will
be displayed). Presenting the proximity tag once
again will DISARM the system.
Instead of pressing the
button (see above),
you can press the
button once / twice (the
message "<OK> for HOME" / "<OK> for disarm" is
displayed, accordingly) and then press the press
button for HOME arming / disarming.
The control panel transmits an RF signal. A valid
proximity tag that is presented to the control panel
transmits a coded RF signal back to the control unit.
Display when Partitioning is enabled
In Non-Partition mode In Partition mode (for
example partition #3)
READY RDY
NOT READY N.RDY
ARM AWAY P3 ARM AWAY
PLEASE EXIT NOW P3 PLS EXIT NOW
AWAY P3 AWAY
ARM HOME P3 ARM HOME
AWAY HH:MM P3 AWAY HH:MM
HOME HH:MM P3 HOME HH:MM
ARM HOME MEMORY P3 HOME MEM
ARMING INSTANT P3 ARM INSTANT
ARM HOME INSTANT P3 ARM HOME INST
ARMING LATCHKEY P3 ARM LATCHKEY
READY HH:MM P3 RDY HH:MM
READY MEMORY P3 RDY MEM
NOT READY HH:MM P3 N.RDY HH:MM
NOT READY MEMORY P3 N.RDY MEM
READY TRBL P3 RDY TRBL