Specifications

Managing System Configuration
53
The Management tab includes the following:
• PowerLink ID – The nick name of the PowerLink. Allows you to connect to
the PowerLink with the ID instead of serial number.
• Ports - Allows changing the network ports in which PowerLink operates. HTTP
is the port used for accessing your PowerLink from the internal network.
HTTPS is used for access from the internet. If PowerLink is connected to a
router that supports UPNP, checking the Open using UPNP will open the ports
on the router automatically.
• Session Timeout – The amount of minutes until the user will be auto logged out
from the web interface. Setting this to 0 (zero) will disable auto logout.
• Factory Settings – Press the RESET button to restore the PowerLink to it's
factory defaults
Network
The Network tab includes the following:
• Hostname – The hostname that PowerLink will report to the network
• IP Address – The network parameters of the PowerLink:
• IP Address – The IP address of the Visonic PowerLink
• Subnet Mask – The subnet mask used with the IP Address
• Default Gateway – The default gateway of the network
• DNS Server – The IP address of the DNS server