Specifications

Managing Video Cameras
45
• Click the icon to block viewing this camera from the web interface when
the alarm system is in AWAY arming mode (Alarm images will still be
recorded). The icon will change to indicating that this camera is blocked
when alarm system is in AWAY arming mode.
• Click the icon to block viewing this camera from the web interface when
the alarm system is in HOME arming mode (Alarm images will still be
recorded). The icon will change to indicating that this camera is blocked
when alarm system is in HOME arming mode.
• Click the
icon to block viewing this camera from the web interface when
the alarm system is in DISARM arming mode (Alarm images will still be
recorded). The icon will change to
indicating that this camera is blocked
when alarm system is in DISARM arming mode.
• Click button to apply the changes you've made.
Adding / Removing Cameras
If you want to be able to view images from inside your home via the internet, you
need to have at least one supported camera connected to your PowerLink.
¾ To configure a CAM3100 / CAM3200 / CAM2000 / CAM2000WL
camera in the Visonic PowerLink:
1. Connect the camera to the Home Router using the supplied Cat-5 cable and to
the mains.
2. Wait for the camera to connect to the network (about 30 seconds)
3. In the ADD CAMERA area in the click next to the CAMERA TYPE field
and select NETWORK at the window that opened.
4. In the Location list click and select a location from the list.
5. Click the icon if your camera is installed upside down to flip and mirror
the feed from this camera
6. Click the or icons to choose on which arming modes will the
camera be blocked from being viewed through the web interface.
7. Click to start enrollment of the camera. Enrollment messages will be
available at the alert popup.
You can leave this page and continue using the PowerLink while the enrollment is
continuing at the background.
When enrollment finishes successfully the camera will be added to the EDIT
CAMERAS area of the Camera Configuration page.