Specifications

Managing Video Cameras
42
Chapter 6: Managing Video Cameras
The Visonic PowerLink supports up to 14 cameras. Cameras can be Wired (RS-485,
Ethernet) or Wireless (Wi-Fi). Users who purchase the Visonic PowerLink along with
cameras can view the camera images on-line over the Internet.
For each connected camera, the Visonic PowerLink stores 5 frames of pre-alarm and
10 frames of post-alarm images. Images are stored at the time of alarm and can be
used to verify the alarm by the user or alarm central station.
PowerLink keeps your privacy by allowing choosing arming modes of the alarm
system in which a camera will be blocked for viewing from the web interface.
The Visonic PowerLink can control a variety of cameras. CAM1000 and CAM2000
are wired. CAM2000WL, CAM3100 and CAM3200 cameras are wireless cameras.
CAM1000 cameras are connected directly to the Visonic PowerLink while
CAM2000, CAM2000WL, CAM3100 and CAM3200 cameras are connected to the
Visonic PowerLink via the Home Router or Wi-Fi Access Point.
Note
The Visonic PowerLink also supports a veriaty of non Visonic cameras. A list is available
at the specification page.
CAM1000
CAM2000
CAM2000WL
CAM3100
CAM3200
¾ To display the Cameras View:
1. In the side menu of the Visonic PowerLink window click .
The Cameras view is displayed.