Specifications

Logging Into The Visonic PowerLink
25
Chapter 3: Logging Into The Visonic PowerLink
You log in to the Visonic PowerLink through the Internet Browser.
After you log in the Quick View window is displayed with an overall view of the
security system. Loading time of the Quick View screen may vary due to the heavy
amount of data presented. First time loading is expected to take longer than future
loading times.
¾ To login to your Visonic PowerLink
1. Open your Internet Browser.
2. In the Address line, type the address given to you by the installer.
If you have installed the Visonic PowerLink yourself, use the following addresses:
From within the house:
http://<PowerLink IP Address>. Replace <PowerLink IP Address> with the PowerLink
IP Address value from your installation form (see appendix A).
From a remote computer:
http://myhome.visonic.com/<PowerLink ID> Replace <PowerLink ID> with the
PowerLink ID value from your installation form (Appendix A). By default, your PowerLink
ID is equivalent to your PowerLink Serial Number (displayed in the SETUP menu).
3. A Security Alert message will be displayed:
a. In Microsoft Internet Explorer 6, click Yes: