m Fully upervised wireless s alarm control stem Fully upervised wireless s alarm control ntrol stem Fully upervised User Guide PowerMaster-10/ PowerMaster-30 Fully supervised wireless alarm control system Your professional installer: Eagle Security Solutions Ltd Tel: 020 8853 0580 www.eaglesecuritysolutions.co.
PowerMaster-10 / PowerMaster-30 User's Guide Table of Contents 1. Introduction .................................................... 3 Preface ......................................................... 3 Overview ....................................................... 3 System Features ........................................... 3 PowerMaster-10 Panel Indicator and Controls ..................................................................... 5 LED Indicators ..............................................
C.12 Enabling / Disabling the Squawk Option .................................................................... 47 C.13 Programming the Scheduler ............... 48 C.14 Enabling / Disabling Voice Option ...... 51 7. Event Reporting and Control by Telephone and SMS ........................................................ 52 Event notifications by Telephone ................ 52 Event notifications by SMS ......................... 52 Remote Control by Telephone .................... 52 Remote Control by SMS ..
INTRODUCTION 1. Introduction Preface Dear Customer, Thank you for choosing PowerMaster-10 / PowerMaster-30, a highly advanced wireless alarm control system produced by Visonic Ltd. Note: Make sure that you have the name and telephone number of the monitoring station your system will report to. If you ever call the monitoring station to ask questions, you should have access to your "ACCOUNT NUMBER" used to identify your alarm system to the monitoring station.
INTRODUCTION • Liquid crystal display (LCD): Plain-language status information and prompts are displayed on the front panel in large, clear text. • Real-time clock: The present time is visible on the display. This feature is also used for the log file by providing the date and time of each event. • Various reporting destinations: Events can be reported automatically to monitoring stations, private telephones and mobile phones of your choice, and even by SMS if GSM is installed.
INTRODUCTION PowerMaster-10 Panel Indicator and Controls 1 2 3 20 4 5 6 7 9 10 12 8 11 13 14 15 16 17 18 19 Figure 1a. PowerMaster-10 Controls and Indicators LED Indicators No. Indication Function 2 Power (Green): Indicates that your system is properly connected to the power outlet. 3 Arm (Red): Lights when the system is in the armed state. 4 Chime (Green): Chime zones will chime when disturbed (see Chapter 2).
INTRODUCTION Other Keys No. Indication Function 13 Chime ON/OFF 15 Reviewing the event log 17 Emergency (hold for 2 sec.) 18 Fire (hold for 2 sec.) 19 Press both buttons simultaneously for panic alarm + PowerMaster-30 Panel Indicator and Controls Figure 1b. PowerMaster-30 Controls and Indicators LED Indicators No. Indication Function 2 Power (Green): Indicates that your system is properly connected to the power outlet. 3 Arm (Red): Lights when the system is in the armed state.
INTRODUCTION Arming Keys No. Indication Function 12 AWAY: Arming when nobody is at home 10 HOME: Arming when people remain at home. 14 INSTANT: Canceling the entry delay upon arming (AWAY or HOME) 11 DISARM / OFF: Disarming the system and stopping alarms 16 PARTITION: Partition selection Other Keys No. Indication Function 13 Chime ON/OFF 15 Reviewing the event log 17 Emergency (hold for 2 sec.) 18 Fire (hold for 2 sec.
INTRODUCTION General Audible Indicators The sounds you will hear while using the control panel are: Sound Definition Single beep, heard whenever a key is pressed Double beep, indicates automatic return to the normal operating mode (by timeout). Three beeps, indicates a trouble event ♫☺ ♫ Happy Tune (- - - –––), indicates successful completion of an operation.
INTRODUCTION Proximity Tags Your system responds to valid proximity tags enrolled to the system. The proximity tag enables you to perform a variety of functions without entering user code, for example, arming, disarming, reading the event log, etc. Whenever the user code is required, you can simply present a valid proximity tag and perform the desired operation without the need to key-in your user code.
OPERATING THE POWERMASTER SYSTEM 2. Operating the PowerMaster System For more information regarding terms used in this chapter, refer to APPENDIX B. GLOSSARY. Note: Except for specific reference to PowerMaster-30 functions, the buttons displayed throughout the User's Guide are of the PowerMaster-10 control panel. When using the PowerMaster-30 control panel, these buttons can be interchanged.
OPERATING THE POWERMASTER SYSTEM ENTER CODE ____ Arming ‘AWAY’ If the system is READY and quick arming is allowed, proceed as shown: PRESS RESULTING DISPLAY ARMING AWAY PLEASE EXIT NOW Vacate the premises ↓ (Exit delay) ↓ AWAY ARM indicator lights steadily during the armed state.
OPERATING THE POWERMASTER SYSTEM Special Arming & Disarming Options In addition to basic arming, PowerMaster-10 / PowerMaster-30 provides you with several advanced arming and disarming options: Switching from ‘HOME’ to ‘AWAY’ . The response will be the same as in ARMING AWAY above. Do not disarm the system - just press Vacate the premises before the exit delay expires. Switching from ‘AWAY’ to ‘HOME’ Do not disarm the system - simply press .
OPERATING THE POWERMASTER SYSTEM Note: When forced arming is carried out, the buzzer “protests” by emitting a continuous tone during the exit delay until the last 10 seconds of the delay. You can silence this signal by pressing the arming button again.
OPERATING THE POWERMASTER SYSTEM Note: Latchkey must be enabled by your installer. ARM indicator lights during the armed state. Disarming under Duress. If you are forcibly compelled to disarm the system, enter the duress code (2580 by default) or another code set by the installer. Disarming will take place normally but a silent alarm will be transmitted to the monitoring station.
OPERATING THE POWERMASTER SYSTEM Initiating Alarms Following are various methods that may be used for initiating alarms. Initiating Panic Alarm with Keyfobs Using the KF-234 PG2 you can initiate a PANIC alarm by pressing both AWAY simultaneously for 2 seconds. and HOME keys Low Battery Indication If the battery power is near the end of its life, the keyfob LED indicates this by flashing the yellow light at the end of keyfob activation.
OPERATING THE POWERMASTER SYSTEM Initiating Emergency Alarm You can generate a silent emergency alarm manually in the disarmed and armed states, as follows: PRESS for 2 seconds RESULTING DISPLAY EMERGENCY Then, if or when the system is in the disarmed READY HH:MM (alternating) READY MEMORY Siren Alarms The maximum operating time of the siren is configured by the installer according to local regulations.
OPERATING THE POWERMASTER SYSTEM The following diagram shows how to decrease the loudness of the beeps with the <4> key (assuming that the volume was at maximum to begin with).
SPEECH AND SOUND CONTROL 3. Speech And Sound Control∗ Speech & Sound Cont. Push-buttons The sound and speech-related functions offered by the control panel are controlled with the keypad, as detailed in the following list. When partitioning is enabled: Sound and speech-related features only apply to the partition(s) where the control panel is present. An activity performed via the control panel from another partition will be displayed and the LED will light.
SPEECH AND SOUND CONTROL Voice ON/OFF You can switch spoken announcements on and off by alternate clicking of the <7> key, as shown below. RESULTING DISPLAY PRESS VOICE ON VOICE OFF ↓ READY HH:MM Note: The system will maintain the “Voice OFF” state until subsequent selection of “Voice ON’. Message Exchange For message exchange you can record a verbal message for other users of the alarm system. Face the panel, press <2> and keep it pressed. When the display reads TALK NOW, start talking.
ELECTRICAL APPLIANCE CONTROL 4. Electrical Appliance Control Control Options and Pushbuttons The system allows manual or automatic remote control of a device connected to the PGM output. The user defines the ON and OFF times via the Scheduler (see Chapter 6 - C.13 Programming the Scheduler). The installer determines which zone sensors will switch the remote controlled appliances on and off.
ELECTRICAL APPLIANCE CONTROL If not satisfied Press BY SENSOR OFF If satisfied BY SENSOR OFF BY SENSOR OFF READY HH:MM D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 21
REVIEWING TROUBLES AND ALARM MEMORY 5. Reviewing Troubles and Alarm memory Alarm & Tamper Memory Indication The PowerMaster-10 / PowerMaster-30 retains in its memory alarm and “tamper” events that occurred during the last arming period. Note: Alarm events are memorized only after the “abort period” (see Appendix B). This means that if you disarm the system immediately - before the abort period expires - there will be no memory indication A.
REVIEWING TROUBLES AND ALARM MEMORY Clearing the Memory Indication To clear the ‘Memory’ indication you must first review the cause of alarm as described above. Once you return and enter the code if requested, then press Disarm to the ‘Ready’ screen simply press Away followed by the code. The memory message will now clear. Otherwise the memory indication and content will be cleared upon the next arming of the system. Troubles A.
REVIEWING TROUBLES AND ALARM MEMORY IMPORTANT! If the trouble beeps bother you, disarm the system again (even though it is already disarmed). This will cancel the trouble beeps for 4 hours. C. Reviewing Memory & Troubles at the Same Time If alarms / tamper events are retained in the alarm memory and at the same time a state of trouble exists, the display will first read the alarm memory followed by trouble events, as described in sections A & B above.
MENUS AND FUNCTIONS 6. Menus and Functions This chapter explains the user programming features of your PowerMaster-10 / PowerMaster-30 system and allows you to tailor the PowerMaster-10 / PowerMaster-30 system according to your specific needs. The chapter is divided into three sections, as follows: Part A – Provides you with a general description of available User Setting options. Part B – Guides you how to enter/exit the User Settings menu and how to select the desired setting options.
MENUS AND FUNCTIONS B.1 Entering the User Settings Menu & Selecting a Setting Option The following procedure describes how to enter and move within the User Settings menu. Detailed descriptions of the User Setting options are provided at the end of the procedure. To exit the User Settings menu – see section B.2. 1. You can enter the "User Settings" menu only when the system is disarmed. 2.
MENUS AND FUNCTIONS C. User Setting Options Menu Click the button. button until the display reads the desired setting option and then press the SET ZONE BYPASS Use to set the Zone Bypass Scheme i.e. to bypass (exclude) faulty or unsecured ("disturbed") zones, or to clear a bypassed zone (unbypass). For further details and programming procedure see section C.1. 3 REVIEW BYPASS Use to quickly review the Bypass Scheme i.e. which zones are bypassed.
MENUS AND FUNCTIONS B.2 Returning to the Previous Step or Exiting the USER SETTINGS Menu During the setting process it is frequently necessary to return to the previous setting step or option (i.e. "to go one level up") or to exit the User Settings menu. A. To Move One Level Up To move one level up during the setting process, click the one level up or to the previous setting step: button once or more. Each click will take you B.
MENUS AND FUNCTIONS C.1 Setting the Zone Bypass Scheme Bypassing permits arming only part of the system while allowing free movement of people within certain zones when the system is armed. It is also used to temporarily remove from service faulty zones that require repair work or to deactivate a sensor if, for example, you are decorating a room. ♦ Here you can set the Zone Bypass Scheme i.e.
MENUS AND FUNCTIONS B. To Clear a Bypassed Zone 6. Z04: BYPASSED 7. Kitchen TO CLEAR Repeat steps 1 to 2 above. When the zone you wish to clear bypass appears on the display (for to confirm. You can also identify the device example, "Z04"), press by looking for the "it's me" LED indication on the displayed device. The display now reads [ TO CLEAR]. 3 To clear the bypassed zone press the 8. Z04: READY button. A "Happy Tune" ☺ sounds and the updated zone status is now displayed, i.e.
MENUS AND FUNCTIONS Additional Information (section C.1 – C.3) 1 2 For detailed instructions on how to select User Settings – refer to section B.1 and section B.2. a. The STATUS to the right of the zone number indicates whether the zone is READY, NOT-READY or BYPASSED. b. In the example on the left the display reads [Z01: READY] alternating with [Living Room]. 3 a. If the zone you selected is "not bypassed", the display prompts you to press [ TO BYPASS].
MENUS AND FUNCTIONS C.4 Programming User Codes The PowerMaster-10 / PowerMaster-30 system allows you to authorize up to 8 people (in PowerMaster-10 system) / 48 people (in PowerMaster-30 system) to arm and disarm the system by providing each with a unique 4 digit personal security code, and assigning them with different security levels and functionalities.
MENUS AND FUNCTIONS A. To Program a User Code 1. USER CODES 2. User 01 Code or 3. User 26 Code 4. User 26 : 5327 Enter the USER SETTINGS menu, select the [USER CODES] option and button to confirm. 1 press the The first user code "User 01 Code" is displayed. 2 At the blinking cursor position, key in the User Code you wish to program , for example, [2+6] for user code 26, or alternatively click the or button until the display reads, "User 26 Code".
MENUS AND FUNCTIONS Additional Information (section C.4) 1 2 3 For detailed instructions on how to select the setting options – refer to section B.1 and section B.2. The display shows the 1st User Code (Master User) in the list of 8 User Codes (in PowerMaster-10 system) / 48 User Codes (in PowerMaster-30). If you have not yet changed the default code 1111, we recommend that you change it now. a. The display shows the user code currently programmed in this location (e.g. 5327). b.
MENUS AND FUNCTIONS C.5 Add / Delete Proximity Tags Each of the 8 PowerMaster-10 / PowerMaster-30 users may be provided with a proximity tag that can be used instead of the user codes to perform a variety of functions, for example, arming, disarming, reading the event log, etc. Whenever a user code is required you can simply present a valid proximity tag instead of entering the user code. Each tag should be assigned with a serial No.
MENUS AND FUNCTIONS B. To Delete a Proximity Tag 1. PROXIMITY TAG 2. ADD NEW TAG Enter the USER SETTINGS menu, select the [PROXIMITY TAG] option and press the button to confirm. 1 The display will read [ADD NEW TAG]. Click the 3. DELETE TAG T01:Tag (prox) 4. or Press button until the display reads [DELETE TAG]. to confirm. The display will read [T01:Tag (prox)] alternating with the ID number of the tag.
MENUS AND FUNCTIONS C.6 Add / Delete Keyfob Transmitters Each of the 8 PowerMaster-10 / PowerMaster-30 users may be provided with a portable keyfob transmitter to exercise better, quicker and safer arming/disarming and other control functions. Each keyfob should be assigned with a serial No. 1-8 (PowerMaster-10) / 1-32 (PowerMaster-30) and enrolled into the system correspondingly.
MENUS AND FUNCTIONS F25:keyfob ☺ Return to step 2 key in [2+5] or alternatively click the or display reads [F25:Keyfob] and then press button until the to confirm. The display reads [DEVICE ENROLLED] or [ID accepted] if the keyfob was enrolled manually by entering the ID number, a "Happy Tune" ☺ sounds and the display will then change to [F01:Keyfob]. B. To Delete a Keyfob 1. KEYFOBS 2. ADD NEW KEYFOB Enter the USER SETTINGS menu, select the [KEYFOBS] option and press the button to confirm.
MENUS AND FUNCTIONS Additional Information (section C.6) 1 2 3 4 5 5 6 7 The LED will extinguish after several seconds. In case of difficulties in communication with the control panel, the LED may blink for several seconds more while trying to establish communication. During this period of time the keyfob keys are disabled. For detailed instructions on how to select User Settings – refer to section B.1 and section B.2. The display shows the 1st Keyfob (Keyfob No.1) of the 8 keyfobs.
MENUS AND FUNCTIONS C.7 Setting the Time & Time Format ♦ Here you can program or adjust the built-in-clock to show the correct time in the desired time format. ♦ You can select between a 24 hour and a 12 hour (AM/PM) time format. Carefully read the section titled "Additional Information" according to the indicated references1 etc – see table at end of this section. A. To Set the Time Format 1. TIME & FORMAT 2.
MENUS AND FUNCTIONS C.8 Setting the Date & Date Format ♦ Here you can program or adjust the built-in-calendar to show the correct date in the desired date format. ♦ You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format. Carefully read the section titled "Additional Information" according to the indicated references1 etc – see table at end of this section. A. To Set the Date Format 1. DATE & FORMAT 2.
MENUS AND FUNCTIONS C.9 Enabling / Disabling Auto-Arming The PowerMaster-10 / PowerMaster-30 system can be programmed to automatically arm itself on a daily basis at a predetermined time. This feature is useful especially in commercial applications, such as in stores, to ensure that the system is always armed and without having to assign security codes to employees. ♦ Here you can enable (activate) and disable (stop) the Auto-Arming. To set the Auto-Arming time – see section C.10.
MENUS AND FUNCTIONS C.11 Programming Private Phone and SMS Reporting The PowerMaster-10 / PowerMaster-30 system can be programmed to send various event notification messages such as alarm, arming or trouble events, to 4 private telephone subscribers by audible signal and if a GSM option is installed, also to 4 SMS telephone numbers. These reports can be programmed either instead of or in addition to the reports transmitted to the monitoring company.
MENUS AND FUNCTIONS 8. 032759333 To program or edit the phone number, at the blinking cursor position enter the phone number, for example, “8032759333”, using the numerical keypad. 5, 6 When done, press 9. 8032759333 ☺ Return to step 7 to confirm. A "Happy Tune" ☺ sounds, the display confirms the telephone number and returns to step 7. 7, 12 C. To Program the Number of Redial Attempts 10. 2nd private tel# or 11. button until the display reads [Redial to confirm.
MENUS AND FUNCTIONS 19. Tel. acknowledge by single ack 20. or by all ack The display shows the currently selected option. Click the or button until the display reads the desired acknowledge method, for example, "by all ack". 10 21. all ack ☺ Return to step 19 A "Happy Tune" ☺ sounds. The display confirms the set acknowledge method and returns to step 19. 4, 12 SMS REPORT A. To Program Events to be Reported by SMS 1. PRIVATE REPORT 2. VOICE REPORT 3. SMS REPORT 4.
MENUS AND FUNCTIONS Additional Information (section C.11) 1 2 3 4 5 For detailed instructions on how to select User Settings – refer to section B.1 and section B.2. This option allows you to program the events to be reported. If you wish to program telephone numbers or SMS numbers, click the or button until the display reads the option you wish. The display shows the currently selected option (indicated by a symbol), for example, "disable report".
MENUS AND FUNCTIONS C.12 Enabling / Disabling the Squawk Option The PowerMaster-10 / PowerMaster-30 system (and its wireless sirens) can be set to produce a short "Squawk" of audible feedback to assist you when you use your keyfob to arm (1 beep) and disarm (2 beeps) the PowerMaster-10 / PowerMaster-30 system (operates in a similar manner to a car alarm). ♦ Here you can enable / disable the Squawk. 1.
MENUS AND FUNCTIONS C.13 Programming the Scheduler The PowerMaster-10 / PowerMaster-30 system includes a PGM output that can be used to open and close an electrically-controlled gate, or to control a preferred electrical device via keyfobs (refer to "Using keyfob transmitters" in Chapter 2) or according to a programmable weekly time schedule. ♦ Here you can schedule the PGM output for up to 4 different ON/OFF time activations per any desired day or days of the week.
MENUS AND FUNCTIONS 8. Start-07:30A Start-00:30P The display shows the current setting of the start time. 5 Use the numerical keypad to set or change the operation ON (start) time, for example, “00:30P”. 6 When you are satisfied with the setting, press to confirm. 9. ☺ Go to step 10 A "Happy Tune" ☺ sounds. The display confirms the saved start time and returns to the "start time" screen as in step 7. To set the stop time, continue to step 10. E. To Set the OFF (Stop) Time 10.
MENUS AND FUNCTIONS Device Device Description Day Operation 1 Operation 2 Operation 3 Operation 4 PGM Monday ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ PGM Tuesday ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ PGM Wednesday ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ ON: OFF: _ _: _ _ _ _: _ _ PGM Thursday O
MENUS AND FUNCTIONS C.14 Enabling / Disabling Voice Option∗ The system allows you to enable or disable Status-dependent, pre-recorded verbal messages that are heard over the built-in loudspeaker. ♦ Here you can enable / disable the Voice Option. 1. Carefully read the section titled "Additional Information" according to the indicated references1 etc – see table at end of this section. Enter the USER SETTINGS menu, select the [VOICE OPTION] option and VOICE OPTION press the 2. button to confirm.
EVENT REPORTING & CONTROL BY TELEPHONE AND SMS 7. Event Reporting and Control by Telephone and SMS Event notifications by Telephone The PowerMaster-10 / PowerMaster-30 can be programmed for selective notification of event messages to private telephone subscribers – See Chapter – 6, C.11 Programming Private Phone and SMS Reporting. In case of alarm the following voice signal will be sent to private telephones upon event reporting: * FIRE: ON - ON - ON - pause.... (- - - - - - ......). ...
EVENT REPORTING & CONTROL BY TELEPHONE AND SMS To connect to the PowerMaster-10 / PowerMaster-30 via GSM: 1. Dial the PowerMaster-10 / PowerMaster-30 GSM tel. No. 2. Wait for 2-4 rings then hang up. 1 3. Wait 12-30 sec. 4. Redial PowerMaster-10 / PowerMaster-30 GSM tel. No. 5. [User code], [#] 2 6.
EVENT REPORTING & CONTROL BY TELEPHONE AND SMS 17 Command Notes Single Partition Keying All Partitions Keying Sequence / PowerMaster-10 Sequence (PowerMaster-30) Quit (end communication) [ ] [9] [9] [#] [ ] [9] [9] [#] Remote Control by SMS PowerMaster-10 / PowerMaster-30 system with GSM unit can respond to SMS commands from any cellular telephone (a detailed SMS message sending process is described in the cellular telephone user’s guide). The various SMS commands are detailed in the following table.
SPECIAL APPLICATIONS AND FUNCTIONS 8. Special Applications and Functions Looking after People Left at Home In addition to acting as an alarm system, the PowerMaster-10 / PowerMaster-30 can also be used to monitor the movement of people at home when the system is in the disarmed state (or even when armed “HOME” with perimeter protection only), and report lack of motion in interior zones if there is no detection of motion within predetermined time limits.
TESTING THE SYSTEM 9. Testing the System Periodic Test The components of your security system are designed to be maintenance-free as much as possible. Nevertheless, it is mandatory to test the system at least once a week and after an alarm event to verify that all system sirens, detectors, keyfobs, keypads and other peripherals function properly. Proceed as described in this section and if there is any problem, notify your installer at once.
TESTING THE SYSTEM Z01 24.5°C Z01:Temp. Sensor The control panel reads the temperature of each zone. The display alternates between the temperature, the sensor number and the sensor location. 8 Repeatedly click the button to review the temperature of each zone (by Temperature Sensor). Guest room 9. DEVICE TESTS END or When the temperature of all zones has been reviewed, the display reads [DEVICE TESTS END].
TESTING THE SYSTEM Additional Information (Periodic Test) 1 2 3 4 5 6 7 8 9 10 Display shown in disarm state when all zones are secured (00:00 or other digits show present time). If you have not already changed your personal code number, use the default setting – 1111. If the INSTALLER CODE is used to enter the Periodic Test instead of the USER CODE, the devices LED will also provide the link quality indication – see PowerMaster-10 / PowerMaster-30 Installer Manual. .
MAINTENANCE 10. Maintenance Replacing the Backup Battery The PowerMaster-10 / PowerMaster-30 uses regular electrical supply, but incorporates rechargeable backup 4.8V battery pack to ensure its proper operation during a power failure (see sticker on battery cover). After power failure the battery is recharged to its full capacity.
MAINTENANCE Reading the Event Log To read the event log, proceed as follows: READY 00:00 1. ENTER CODE: _ 2. When the PowerMaster-10 / PowerMaster-30 display reads [ENTER CODE: _], enter the current master user code. CODE LIST OF EVENTS 3. The "Happy Tune" will sound and the PowerMaster-10 / PowerMaster-30 display will read [LIST OF EVENTS].
APPENDIX A. PARTITIONING APPENDIX A. PARTITIONING∗ The control panel includes an optional partition feature. Partitioning is available only if your installer has enabled the feature. Once partitioning is enabled Partitioning menus are added to the system which can be viewed on the control panel's LCD display.
APPENDIX A. PARTITIONING Show Single Partition In Ready mode, press and then press the partition number. The display will show information relevant to the selected partition. Press repeatedly to view memory / status content Note: After 5 seconds of no button press there will be a timeout and the display will revert to the all partition display. Siren A partition is alarmed when receiving an event from an alarmed device assigned to that partition.
APPENDIX A. PARTITIONING Arming Station PG2 The Arming Station PG2 virtual keypad is used to control a partition / partitions. Arming/Disarming Partitions∗ Note: Before using Partitioning, make sure it is enabled in the control panel (see PowerMaster-30 Installer Guide). To arm/disarm partitions, press the desired partition number/s ( action by pressing the present the proximity tag.
APPENDIX B. GLOSSARY APPENDIX B. GLOSSARY This list of terms is arranged in alphabetical order. Any term indicated by cursive (italic) letters within the explanatory text can be looked up separately. Abort Period: When an alarm is initiated, the internal sounder is activated first for a limited period of time which is the abort period set by the installer.
APPENDIX B. GLOSSARY Forced Arming: When any one of the system zones is disturbed (open), the alarm system cannot be armed. One way to solve this problem is to find and eliminate the cause for zone disturbance (closing doors and windows). Another way to deal with this is to impose forced arming - automatic de-activation of zones that are still disturbed upon termination of the exit delay. Bypassed zones will not be protected throughout the arming period.
APPENDIX B. GLOSSARY State: AWAY, HOME, AWAY-INSTANT, HOME-INSTANT, LATCHKEY, FORCED, BYPASS. Status: AC fail, low battery, trouble, system state etc User Codes: The PowerMaster-10 / PowerMaster-30 is designed to obey your commands, provided that they are preceded by a valid security access code. Unauthorized people do not know this code, so any attempt on their part to disarm or defeat the system is bound to fail.
APPENDIX C. HOME FIRE ESCAPE PLANNING APPENDIX C. HOME FIRE ESCAPE PLANNING Fire can spread rapidly through your home, leaving you a short time to escape safely. Your ability to get out depends on advance warning from smoke detectors and advance planning - a home fire escape plan that everyone in your family is familiar with and has practiced. • Pull together everyone in your household and make an evacuation plan. • Draw a floor plan of your home, showing two ways out of each room, including windows.
FCC STATEMENT The 915 MHz model of this sensor complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This sensor may not cause harmful interference, and (2) this sensor must accept any interference that may be received, including interference that may cause undesired operation. The digital circuit of this sensor has been tested and found to comply with the limits for a Class B digital sensor, pursuant to Part 15 of the FCC Rules.
PowerMaster-10/30 G2 V15 Manual Updates This addendum describes changes in features, functionality and interface of the PowerMaster system version 15. The changes mentioned in this addendum are updates to the accompanying Installer and User Guides of version 13 of the PowerMaster system.
Record Speech This section is an update to the PowerMaster-10/30 G2 Installer's Guide – section 3.8.2 You can record short-duration speech messages for the house identity, user names and custom zone names. For the recording procedure follow the instructions below. Additional details and guidance are provided in section 5.2.
BS8243 Setup 13:OPERATION MOD ⋅⋅⋅ 02:BS8243 SETUP Enter the "02:BS8243 SETUP " menu, and press Option 01:DISARM OPTION to configure BS8243 compliance standard settings. Configuration Instructions Define when it is possible to disarm the system: entry/BS devs (default) – By keypad after the entry delay has expired and if an alarm occurred in the system. By keyfob or keyprox at all times. Entry/all devs - During entry delay, when the system is armed AWAY, by all devices.
07:RPT CNFM ALRM Define whether the system will report a confirmed alarm. enable + bypass (default) - The system will report a confirmed alarm and will bypass all alarmed open zones when the siren ends or when the confirmation timer expires. disable - The system will not report a confirmed alarm. enable - The system will report a confirmed alarm.
05:CONFIRM ALARM Define a specific time period that if 2 successive alarms occur, the second alarm will be considered as a confirmed alarm, (see REPORT CNFRM ALARM below). Options: 30/45/60 (default)/90 minutes 06:CONFIRM PANIC A confirmed panic alarm is reported if one of the following occurs within the confirmation time: a) A second panic device is activated. b) A second panic alarm on the same device is activated.
Using the User Code This section is an update to the PowerMaster-10/30 G2 User's Guide – Chapter 9 "Testing the System". A. To Enter the Periodic Test Menu 1. READY 00:00 Make sure the system is disarmed and then press the until the display reads "PERIODIC TEST" and press button repeatedly 1 to confirm. PERIODIC TEST 2. 3. ENTER CODE: The screen will now prompt you to enter your user code. CODE Enter your User Code. 2 2 3 ☺ Go to step 4 B. To Test the Sirens 4.
©Visonic LTD.
