Operation Manual

MENUS AND FUNCTIONS
D-304829 PowerMaster-10/30 G2 User's Guide 43
A. To Set the Scheduler
1.
SCHEDULER
Enter the [USER SETTINGS] menu, select the [SCHEDULER] option and
press .
1
2.
PGM
When the display reads [PGM], press .
B. To Set the Day
2
Sunday
The 1
st
day of the scheduler is displayed.
3.
or
Click the or button until the display reads the day you wish
to schedule or "Daily", for example, "Tuesday".
2
Tuesday
4.
When the "day" to schedule appears on the display, press .
C. To Select the Activation No.
3
5.
operation No 1
The 1
st
operation (PGM output activation) of the scheduler is displayed.
3
or
Click the or button until the display reads the operation you
wish to schedule, for example, "operation No 3".
operation No 3
6.
When the "operation No." to schedule appears on the display, press .
D. To Set the ON (Start) Time
4
7.
Start-HH:MM
The "start time" screen is shown on the display.
4
To set the start time of the selected operation, press the button.
8.
TIME 10:00A
The display shows the current setting of the start time.
5
TIME 12:30P
Use the numerical keypad to set or change the operation ON (start) time, for
example, “00:30P”.
6
9.
When you are satisfied with the setting, press to confirm.
 ☺ Go to step 10
A "Happy Tune"  ☺ sounds. The display confirms the saved start time and
returns to the "start time" screen as in step 7.
To set the stop time, continue to step 10.
E. To Set the OFF (Stop) Time
10.
Start-HH:MM
Click the or button until the display reads "Stop-HH:MM".
or
Stop HH:MM
When the display reads the desired setting, press to confirm.
11.
TIME 01:30P
The "stop time" of the selected operation is displayed.
5
12.
TIME 04:00P
Use the numerical keypad to set or change the operation OFF (stop) time,
for example, “04:00P”.
6
When you are satisfied with the setting, press to confirm.
 ☺ Return to step 5
A "Happy Tune"  ☺ sounds. The display confirms the saved stop time and
returns to the "operation No" screen, as in step 5.
7