User guide

Getting Started
6
• The Visonic PowerLink2 supports a variety of cameras. For an updated
list of cameras go to the www.visonic.com web site and from the
PowerLink2 page, click on the "Supported Camera Range" link.
• Auto enrollment of LAN and WiFi cameras to the home network
• Auto Capture Of 10 Post Alarm Images Per Camera
• Auto Capture Of 5 Pre Alarm Images Per Camera
• Turn On / Off for web view according to the alarm modes
• Flip & Mirror camera images for floor and ceiling installations
• Camera Actions:
o Pan / Tilt
o Save Image to Local HD
o Current View / Alarm View
Users
• 1 Master User
• 7 Standard Users
Management
• IP Address: Auto configuration or Manual Configuration
• Reset to Factory Defaults Option
• Remote Firmware Upgrade
Web Server
• Ports: 443 (SSL), 80 (HTTP)
• Ports can be changed by user (ports cannot be changed for version
6.4.x and above).
• Automatic port forwarding with UPNP support
• XHTML & WAP support for mobile phone access
Data Security
• 128Bit SSL encryption on all data transmissions to and from the
Internet
• Authentication required by Username and Password
• Login brute force attack protection
• WEP, WPA and no Encryption for WiFi camera in-house image
transfer
Hardware
CPU
• Atmel AT91Sam9260