User guide
Table Of Contents
- PowerLink2 - User Guide
- Chapter 1 Getting Started
- Chapter 2 Installing the Visonic PowerLink2
- Chapter 3 Logging Into The Visonic PowerLink2
- Chapter 4 Visonic PowerLink2 Window
- Chapter 5 Managing Alerts and Alarms
- Chapter 6 Managing Home Devices
- Chapter 7 Managing Video Cameras
- Chapter 8 Managing the Security System
- Chapter 9 Managing Users
- Chapter 10 Managing System Configuration
- Chapter 11 Cellular Web Interface
- Glossary
- Appendix A Troubleshooting
- Appendix B PowerLink2 Installation Form
Cellular Web Interface
52
Viewing the security status
This allows you to view the status of your alarm system as it appears on the LCD
screen.
To view the status of your alarm system:
1. You can view the status of your alarm system from the main menu (XHTML).
On the WAP cellular interface, select Security. The Security screen appears.
Setting the security mode
This allows you to arm or disarm the system using your cellular phone.
To arm or disarm the system:
1. You can arm or disarm the system from the main menu (XHTML). On the WAP
cellular interface, select Security. The Security screen appears.
2. Click on the arming mode to which you desire to set the alarm system.
If the arming mode has several options from which to choose, the menu will expand
and allow you to choose from the list of options. For example, Arm Away will allow
you to choose between Normal and Instant (WAP only).
3. Choose the option you desire (WAP only).