User guide
Table Of Contents
- PowerLink2 - User Guide
- Chapter 1 Getting Started
- Chapter 2 Installing the Visonic PowerLink2
- Chapter 3 Logging Into The Visonic PowerLink2
- Chapter 4 Visonic PowerLink2 Window
- Chapter 5 Managing Alerts and Alarms
- Chapter 6 Managing Home Devices
- Chapter 7 Managing Video Cameras
- Chapter 8 Managing the Security System
- Chapter 9 Managing Users
- Chapter 10 Managing System Configuration
- Chapter 11 Cellular Web Interface
- Glossary
- Appendix A Troubleshooting
- Appendix B PowerLink2 Installation Form
Managing the Security System
40
Chapter 8 Managing the Security System
The Security view Work Area displays a detailed overview of the security system
including the current arming mode of the security system, the status of the security
system, the list of detectors and their statuses and a list of other security system
accessories.
It enables you to remotely arm and disarm the security system in different arming
modes.
Arming the PowerMax Security System
The Visonic PowerLink2 enables remote arming and disarming of the PowerMax
Security System.
The Security view displays the current status of the PowerMax security system
according to the arming mode set.
The following arming modes are available:
• AWAY: All zones are protected
• HOME: Perimeter zones are protected but interior zones are not.
• DISARM: The system is in standby mode
The Security view displays the current arming mode in green.
Current Arming Mode Current Status
Accessories
Detectors Enrolled in the System
System Status