User guide
Table Of Contents
- PowerLink2 - User Guide
- Chapter 1 Getting Started
- Chapter 2 Installing the Visonic PowerLink2
- Chapter 3 Logging Into The Visonic PowerLink2
- Chapter 4 Visonic PowerLink2 Window
- Chapter 5 Managing Alerts and Alarms
- Chapter 6 Managing Home Devices
- Chapter 7 Managing Video Cameras
- Chapter 8 Managing the Security System
- Chapter 9 Managing Users
- Chapter 10 Managing System Configuration
- Chapter 11 Cellular Web Interface
- Glossary
- Appendix A Troubleshooting
- Appendix B PowerLink2 Installation Form
Managing Video Cameras
35
5. Locate the ADD CAMERA area.
6. In the Location list click and select a location from the list.
7. You can disable web viewing of the camera by choosing at which arming
mode the camera will be turned off. Clicking an arming mode icon will apply
a small X to it, meaning that at this arming mode the camera will be off.
8. Click to start the camera enrollment
A message will indicate that enrollment is starting:
You can continue browsing the PowerLink2 web interface, the enrollment process
will continue at the background.
From this point the enrollment messages will be visible at the alert popup: