User guide
Table Of Contents
- PowerLink2 - User Guide
- Chapter 1 Getting Started
- Chapter 2 Installing the Visonic PowerLink2
- Chapter 3 Logging Into The Visonic PowerLink2
- Chapter 4 Visonic PowerLink2 Window
- Chapter 5 Managing Alerts and Alarms
- Chapter 6 Managing Home Devices
- Chapter 7 Managing Video Cameras
- Chapter 8 Managing the Security System
- Chapter 9 Managing Users
- Chapter 10 Managing System Configuration
- Chapter 11 Cellular Web Interface
- Glossary
- Appendix A Troubleshooting
- Appendix B PowerLink2 Installation Form
Getting Started
9
System Requirements
• PowerMax Security System.
• High-Speed Internet connection (Cable or DSL) enabled via a Home Router
(Ethernet Based).
• One free Ethernet port on the home router for the PowerLink2 connection.
• One free Ethernet port on the home router for IP based camera enrollment (will
be freed if camera is WiFi).
• One free Ethernet port on the home router for every added Ethernet camera.
• One of the supported browsers:
o Internet Explorer version 6.0 or up
o Firefox version 1.0 or up
o Safari 4
o Opera 9
• PC running Windows® 2000, XP or Vista connected to the home router.
• Optional: WiFi 802.11b or 802.11g Access Point
Installation Procedure
The Visonic PowerLink2 installation procedure involves three stages:
• Hardware Installation
• Router Configuration
• Visonic PowerLink2 Configuration