Installation Guide

D-308439 MP-802 PG+ Rev.0
About MP-802 PG+
The MP-802 PG+ is a microprocessor-controlled wireless digital PIR detector, with optional pet
immunity.
The device has the following features:
• Fresnel and cylindrical lenses with uniform detection sensitivity throughout its operating
range, up to 12 meters (39 ft).
• Target Specific Imaging™ (TSI) technology is used for distinction between humans and pets
weighing up to 38 kg (85lb).
• The advanced True Motion Recognition™ algorithm (patented) distinguishes between the
true motion of an intruder and any other disturbances which may cause false alarms.
• No vertical adjustment is needed.
• Motion event counter determines whether one (high sensitivity) or two (low sensitivity)
consecutive motion events trigger an alarm.
• Very low current consumption.
• Microprocessor-controlled temperature compensation.
• Front and back tamper protection.
• Temperature sensing and reporting.
• Remote firmware upgrade.
MP-802 PG+ Wireless PIR Motion Detector Installation Guide 19