User guide

4 D-303503 MKP-160 User's Guide
Wall-mounted Installation [Via Battery Cover without Tamper Hole (see "A")]
Figure 3 - Battery Cover Mounting (part b)
A. Tamper B. DC Power Connection – use supplied cable in addition to batteries
C. Wiring channel for wall installation
Note: The DC cable is available in specific models
2.3 Wall Mounting Options
The MKP-160 unit mounting options are illustrated in the following drawings.
Wall Mounting
Figure 4 – Wall Mounting
1. Drill 3 mounting holes 3. Attach the unit to the bracket
2. Position the bracket and secure with 3 screws 4. Secure the unit with the screw
A. Hole for DC power source cable installed in wall