User guide

D-303503 MKP-160 User's Guide 9
2.4 Enrolling the MKP-160
A flowchart of the MKP-160 enrolling procedure is provided below.
Step Action LCD Display
1
Enter the Installer menu and select
“2:ENROLLING”

2
Select "ENROLL WL LCD KP" Option
See Note

3
When "lcd kp No :" appears on the
control panel display, enter the
keyprox number, for example
"lcd kp No : 2".


4
Enroll the device by pressing the
(AUX) button for about 5
seconds until the LED turns ON and
then release the button.

5
The control panel displays the
number of the enrolled device.
6
Configure the MKP-160 Keyprox See section 2.5
 means scroll and select
Note: If the MKP-160 is already enrolled, you can configure the MKP-160 parameters via the
“16.DEFINE ARM ST” main menu.
2.5 Configuring the MKP-160 Parameters
Enter the main menu in the PowerMax control panel, choose the
number of the touch screen keyprox device to configure and follow the configuration
instructions for the MKP-160 touch screen keyprox.
Option Configuration Instructions
Enabling the function will enable a tamper open / close message.
Options settings: disable (default) and enable.
Enabling the function will turn off the display if no key is pressed
for more than several seconds. Tapping on the MKP-160 keyprox
will return the device to normal display.
Options settings: disable (ac) (default) and enable.
Enable/disable AC failure indication on the keyprox device.
Options settings: disable (default) and enable.
TAMPER TYPE
SCREEN SAVER
SHOW AC FAILURE
16.DEFINE ARM ST
arm stn No: 2

TRANSMIT NOW
lcd kp No : 2
lcd kp No :
ENROLL WL LCD KP
2.ENROLLING