User Guide

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
38 D-307074 PowerMaster-10/30 G2 User's Guide
EMAIL BY SERVER
A. To Program Events to be Reported by Email via the server
1.
PRIVATE REPORT
Enter the [USER SETTINGS] menu, select the [PRIVATE REPORT] option
and press .
1
2.
VOICE REPORT
When the display reads [VOICE REPORTS] press repeatedly until
the display reads [EMAIL BY SERVER].
3.
EMAIL BY SERVER
To enter this option, press . The display reads [1st E-MAIL].
4.
1st E-MAIL
Click the or button until the display reads the email you
wish to program
, for example, [2nd E-MAIL] and then press .
or
2nd E-MAIL
Address
The display reads [Address].
5.
Click the button. The display reads [E-MAIL Events].
6.
E-MAIL Events
Press the button.
disable report 
The display shows the currently selected option.
7.
or
Click the or button until the display reads the event group
you wish to be reported via email, for example, [alarm].
13
alarm
8.
When you are satisfied with the setting, press to confirm.
alarm 
A "Success Tune" ☺ sounds. The display confirms the set events to be
reported, and returns to step 6.
5, 15
☺ Return to step 6
B. To Program Emails
9.
Continue from step 4 in the previous section.
10.
1st E-MAIL
Click the or button until the display reads the email you
wish to program or edit, for example, "2nd E-Mail", and press .
or
2nd E-MAIL
11.
Address
When the display reads [Address], press
12.
[e-mail]
To program or edit the email, at the blinking cursor position enter the Email,
for example, “[e-mail]”, using the alphanumerical keypad.
6, 7
13.
When done, press to confirm.
[e-mail]
A "Success Tune" ☺ sounds, the display confirms the Email and returns to
step 11.
8, 15
☺ Return to step 11