User Guide

ManualsBrandsVisonic ManualsBurglar AlarmsPowerMaster-360 Security, Safety and Smart Home Gateway

Contents

Introduction to PowerMaster-360................................................................................................ 3

PowerMaster-360 LED indicators and connectors..................................................................... 5

Operating the alarm system......................................................................................................... 6

Arming and disarming the system............................................................................................... 7

Users and codes............................................................................................................................. 8

Alarms.............................................................................................................................................. 8

Bypassed areas............................................................................................................................... 8

Receiving SMS notifications.......................................................................................................... 9

Operating the alarm system through SMS............................................................................... 10

Periodic testing............................................................................................................................. 10

Replacing the PowerMaster-360 backup battery..................................................................... 11

Replacing batteries in wireless devices..................................................................................... 11

Acknowledging keyfob low battery............................................................................................ 11

Cleaning the control panel.......................................................................................................... 11

Partitions....................................................................................................................................... 12

Siren activity in partitions............................................................................................................ 12

Common areas............................................................................................................................. 13

Home fire escape planning......................................................................................................... 13

PowerMaster-360 specifications................................................................................................. 14

Compliance with Standards........................................................................................................ 15

Visonic Limited Warranty............................................................................................................ 16

Summary of content (18 pages)

PAGE 1
Contents Contents Introduction to PowerMaster-360................................................................................................ 3 PowerMaster-360 LED indicators and connectors..................................................................... 5 Operating the alarm system......................................................................................................... 6 Arming and disarming the system.................................................................................
PAGE 2
PAGE 3
D-307503 PowerMaster-360 User's Guide Introduction to PowerMaster-360 Note: "PM" is used as an abbreviation for "PowerMaster". The PowerMaster-360 is a wireless alarm system used to detect and alert the occurrence of a variety of security and safety hazards, including burglary and fire. The PowerMaster-360 is governed by a control panel that is designed to collect data from various sensors that are strategically located within and along the perimeter of the protected site.
PAGE 4
Looking after people at home The system can be programmed to monitor people's activity within the protected area, and send out an alert message if no movement is detected for a predefined period of time. Partitioning Partitioning allows you to divide the system into three independently controllable areas— for example, garage, main house, basement—with different users assigned to each partition whereby each user can arm the partition to which they are assigned.
PAGE 5
PowerMaster-360 LED indicators and connectors Figure 1: PowerMaster-360 LED indicators and connectors Table 1: PowerMaster-360 LED indicators LED Description A AC power Green: the panel is connected to power B Arming status Red: system is armed away Flashing red: system is armed home Off: system is disarmed C System trouble Orange: system detects an abnormal condition D Server connectivity Blue: a connection is active between the panel and the PowerManage server Off: the panel is not connected to
PAGE 6
Operating the alarm system The alarm system is operated by various remote devices as well as a mobile phone application as follows: Table 2: Operating the alarm system The mobile app enables you to control your home and business security remotely. You can see inside your home or business Mobile application in near real time, and you can make decisions about events and notifications from anywhere using your smart phone.
PAGE 7
Arming and disarming the system Arming the alarm system is an action that prepares the system to sound an alarm if a zone is violated by motion, or by opening a door or window. Disarming the alarm system restores the control panel to the normal standby state. In this state, only fire and 24-hour zones sound an alarm if violated, but a panic alarm can also be initiated. The alarm system can be armed or disarmed using keyfobs and keypads.
PAGE 8
Users and codes As a master user, or user number 1, you need a 4-digit security code to master the system. Code 0000 is not allowed. You can provide security codes to 47 other people to authorize them to use the system. Security codes are used mainly to arm and disarm the system, or to access information that is restricted to authorized users only. The Duress Code enables you to disarm the system using a special code that sends a silent alarm to the monitoring station.
PAGE 9
Receiving SMS notifications The PowerMaster-360 system can be programmed to send SMS event notification messages to four pre-selected mobile phone numbers. The messages can be tagged with a House ID name, for example, JOHN'S HOUSE.
PAGE 10
Operating the alarm system through SMS The PowerMaster-360 system can respond to SMS commands from any cellular telephone. The various SMS commands are detailed in the following table. In this table, means a 4-digit user code and _ means blank space.
PAGE 11
3. Other device test: Each of the other devices in the system is activated by the user and the display indicates which devices were not yet tested. The it's me indication helps to identify the untested devices if necessary. A counter also indicates the number of devices that remain untested. 4. Email test: Generates an event to be sent to the predefined private email addresses. Replacing the PowerMaster-360 backup battery The control panel battery is rechargeable.
PAGE 12
Partitions The control panel includes an optional partition feature. Partitioning is available only if your installer has enabled the feature. Partitioning allows you to divide the system into three independently controllable areas with different users assigned to each partition whereby each user can arm the partition to which they are assigned.
PAGE 13
• When a siren sounds, it will not stop until all alarmed partitions are disarmed. However, if the siren is active due to an alarm from a common area zone, and one of the partitions assigned to this area disarms the system, the siren will also stop. If the alarm is initiated from a common area but continues with zones that are not assigned to a common area, the siren will not stop until all partitions assigned to the alarmed zones are disarmed.
PAGE 14
• Have everyone memorize the emergency phone number of the fire department. That way any member of the household can call from a cellular phone or a neighbor’s home. • Be fully prepared for a real fire: when a smoke alarm sounds, get out immediately and once you are out, stay out—leave the firefighting to the professional. • If you live in an apartment building, make sure that you are familiar with the building evacuation plan. In case of a fire, use the stairs, never the elevator.
PAGE 15
Compliance with Standards Hereby, Visonic Group declares that the PowerG series of central units and accessories are designed to comply with: • U.S. Standards: (FCC) CFR 47 part 15 • Canada Standards: RSS 210 • European CE Standards: EN 300220, EN 301489, EN 50130-4, EN 60950-1 Hereby, Visonic Ltd. declares that the radio equipment type PowerMaster-360 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.
PAGE 16
Cet équipement génère, utilise et peut émettre de l’énergie de fréquence radio et, s’il n’est pas installé et utilise conformément aux instructions du fabricant, peut provoquer des interférences dangereuses pour les communications radio. Toutefois, rien ne garantit l’absence d’interférences dans une installation particulière.
PAGE 17
• damage due to causes beyond the control of the Seller such as excessive voltage, mechanical shock or water damage; • damage caused by unauthorized attachment, alterations, modifications or foreign objects being used with or in conjunction with the Products; • damage caused by peripherals (unless such peripherals were supplied by the Seller; • defects caused by failure to provide a suitable installation environment for the products; • damage caused by use of the Products for purposes other than those for w
PAGE 18
conjunction with the Products, including batteries, shall be covered solely by their own warranty, if any. The Seller shall not be liable for any damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or otherwise, caused by the malfunction of the Products due to products, accessories, or attachments of others, including batteries, used in conjunction with the Products. This Warranty is exclusive to the original Buyer and is not assignable.