Instructions / Assembly

MILANO 200 INSTALLATION INSTRUCTIONS PAGE 4
RECESS INSTALLATION
INSTALLING THE CASSETTES
Using the I-#8 x 3/4”(19mm) Phillips Panhead Screws, install the H-Recess
Mounting Clips 16” from the top and bottom of both sides of the door
opening [4.1]. Lock the Screen Cassettes onto the mounting clips,
right and left [4.2 & 4.3].
4
4.1 H-Clips for Recess Install
4.2 Recess Installation Left
4.3 Recess Installation Right
Insert into clip
flange here.
Insert into clip
flange here.
Snap into clip
notch here.
Snap into clip
notch here.
VIEW FROM
ABOVE
VIEW FROM
ABOVE
Cassette
Cassette
CRIMP WEATHER STRIPS
Crimp in the upraised channel lip on the inside of each corner of the C-Top
Guide Rail to keep the J-Pile/Weather Strip from moving, as shown at left.
5
OPTIONAL • INSTALLING THE SLIDE BOLT
ACCESSORY LOCK
Identify which of the two screen panels will be the one most often used to enter
and exit the home. You will install the Slide Bolt Accessory Lock on the interior
side of this inactive panel (the side less used).
In the interior groove of the pull bar, slide in an S-Slide Bolt at the
bottom and then another at the top. Make certain that the pointed end
of each Slide Bolt faces out [3.1].
3
O
O
PULL BAR
PULL BAR
TOP
BOTTOM
3.1