User Manual

VNS2200 Amplifier & Controller Installation Guide – Version 2.00
VNS2200 Amplifier & Controller – Connections and Adjustments
Port Pin Out (Front View)
POWER /
Programming
Controlled Device
(12VDC or Dry-
Contact) Output
Speaker Audio
Output
Dual Controlled
Device (12VDC or
Dry-Contact)
Output
Dual Speaker
Audio Output
Alphanumeric
Display Output
1 – VDC (IN) 1 – GND (GRN) 1 – Wire 1 1 – GND (1st, GRN) 1 – Wire 1 (2nd) 1 - RX (RS232)
2 – GND 2 – 12V (PUR) 2 – Wire 2 2 - 12V (1st, PUR) 2 – Wire 2 (2nd) 2 – GND
3 – GND (Battery) 3 – N.C. 3 - 12V (2nd, PUR) 3 – N.C. 3 – N.C.
4 – RX (RS232) 4 – GND (2nd, GRN) 4 – Wire 1 (1st) 4 – GND
5 – TX (RS232) 5 – Wire 2 (1st) 5 – VDC (OUT)
6 – N.C.
Line Level Audio
Output with Dry-
Contact Closure
1 – GND (GRN)
2 - Output (PUR)
3 – Audio
4 – GND
OUTPUT (Optional, see details
below)
POWER (6 Pin Female)
OUTPUT (see details below)
2-Way Intercom or Ambient
Noise Level Control (Optional,
8 Pin Male
)
Transmit Antenna (optional,
location may vary)
Receive Antenna (optional,
location may vary)
Manual Volume Adjustment
Status LED