User`s manual

Mail: [e-mail]
Web: www.visionxip.com
6
System Introduction
1. AC power cable: The AC input connector has a socket to connect the product to a
power source.
2. Ethernet connector: An RJ-45 connector is provided for connection to the
10Base-T Ethernet cable or 100 Base-T High Speed Ethernet cable. This port can
automatically detect or coordinate the transmission rate of the network.
3. Use a video/audio output cable for external video/audio transmission if required.
The video source use BNC connector, you can purchase the connector from your
nearby electric material shop.
4. RS-485 port: If an additional rotary stage is required, please use this product at
the rotary stage from the RS-485 port. This product supports rotary stages using
Pelco P and Pelco D protocols.
30 M IR Network Camera Connecting Diagram
25M IR Network Camera Connecting Diagram