User`s manual

Mail: [e-mail]
Web: www.visionxip.com
50
Basic Setting > Network > UPnP (Universal Plug and Play)
If you connect your camera to a router, IP allocator, or wireless AP, your camera will
possibly be blocked by the NAT and can’t be located on the Internet. To penetrate the
firewall, activate the supportive item- UPnP. The Link URL shows the external IP
address and the port of the router. Enter the IP address in the Internet Explorer to
penetrate the NAT.
 Basic Setting > Network > UPnP > UPnP Device
Active: yes (enable)/no (disable)
Device Name: the name of the UPnP device
 Basic Setting > Network > UPnP > UPnP Traversal
Active: yes (enable)/no (disable)
Port Range: the range of the usable ports, from 32768 to 65535 as default
Link URL location: After the network camera penetrates the firewall successfully,
the actual external IP address and port will be shown.
Click “Save” to confirm when you finish.
UPnP setting
Web address