User`s manual

Mail: [e-mail]
Web: www.visionxip.com
39
Basic Setting > User > User Setting (privilege setting)
For special business situations, this product allows you to log in to browse without the
need of keying in your username and password. For this purpose, you need to check
“Enable” at Anonymous Login. To allow the user to control the camera, you need to
check “Enable” at Anonymous PTZ Control. However, “Disable” for both options is
recommended for the sake of security. Depending on the bandwidth and requirements,
a limit up to 10 viewer who are allowed to view the camera simultaneously can be
defined.
Note: The initial login name and password of this product is “root”. This “root” user name
cannot be deleted but the password can be changed. For security purposes, we recommend that
you change and remember the password after the first login. If you forget the new password, the
only way is to use the hardware Reset key to restore the Factory Default.
User setting
Add a new user and set up a
different privilege.
Change the privilege or password of a user. You
cannot chan
g
e the name of the user.
Delete a user from the list.
Log in the username, password and
privilege as required. You can also
define the PTZ control here.
Activate the anonymous view and
camera rotation functions; define the
number of viewers who are allowed for
on-line review simultaneously.