User`s manual

Mail: [e-mail]
Web: www.visionxip.com
22
5. AutoPan: enables/disables AutoPan.
You can enable the AutoPan function to make the camera automatically move
back and forth horizontally. Disable the AutoPan function to stop the scan.
6. Alert: displays alert trigger
This indicator flashes to warn you when a movement or alert is detected. Click to
stop the flash.
7. Warning Message:
Warning Message: The Enable/Disable button is used to start or cancel the display
warning message function. Once you choose to cancel this function, the
message will no longer be displayed.
Save Warning Image: The Enable/Disable button is used to start or cancel the Save
Warning Image to Snapshot folder function. When the button displays
Enable, this indicates that you have to click on this button to enable it. If
the save image function is set to Enable, double-click on the message line
to pop out the image of this warning. When a warning is triggered, there
will be a message display (maximum number of warning is 50). After
exiting this screen, the displayed message will be cleared. (For details on
Setup, please refer to Setup/Application Setting/Event/Event).
AutoPan function
Enable/ disable the alert message
Save function
Alert trigger display
Alert message display area
Enable/ disable the alert message
display
Formatted: Bullets and
Numbering