Product Manual

XPL LED LIGHT BAR
Fig. 1
(Wing
Mounting)
(Wing
Mounting)
(Feet
Mounting)
INSTALLATION IMAGES
TIP: Vision X recommends the use of liquid thread-locker, or
Loctite, to ensure that every bolt and nut are safely secured.
LIGHT ANGLE ADJUSTMENT
1. With Mounting Feet : Use 13mm wrench / sockets to loos-
en bolts on mounting feet. Slide the light bar up or down to
angle the beam. Once desired angle is achieved, tighten
the bolts. See [Figure 3]
2. Wing Side Wing Mounts : Use philips head screwdriver or
socket to loosen bolts on both sides of light bar and adjust
light bar to desired angle. See [Figure 2]
3. A good reference point is at 20 ft; the top of the beam
should be 3” down from center of light (with the light bar at
dead center). Tighten light and enjoy.
Fig. 2
Fig. 3
(M1)
(M2)
(M3)
Mounting Wing
(W1)
WING INSTALLATION IMAGE
Fig. 5