Installation Instructions & User’s Manual VISIONXLIGHTING.
VISION X DURA MINI LED WORK LAMP About The Dura Mini LED Work Lamp: 1 Dura Mini 2 Pigtail Bolt 3 Hex Head [M6] WARNING: Bolts, Nuts, and Washers are Stainless Steel. DO NOT USE Pneumatic or Electric Tools to Tighten and Loosen. The Hardware Will Permanently Lock Together. WIRING INSTALLATION INSTRUCTION 1. Supplied with the light is a 3” Pigtail, Part (P1). 2. Connect the positive red wire Part (R1), and negative black wire Part (B1), into an existing power source.
MOUNTING DIAGRAM MOUNTING KEY Part (B1) Bolt Part (Mounting Bracket) Part (W1) Washer Part (N1) Nut (B1) (Mounting Bracket) (W1) (N1) LIGHT ANGLE ADJUSTMENTS 1. Use a 10mm socket to loosen the 1 Hex head bolts Part (B2) on the side of the light. 2. Adjust the light to your desired angle and tighten Bolt (B2). 1.94”/49mm ADJUSTMENT KEY Part (B2) Bolt a. 10mm Hex Head Bolt (B2) MAINTENANCE All Vision X models have been designed for maintenance free use.
