Product Manual

DURALUX KIT

WARNINGS

As with many other high-tech products, this VISION X LED re-

quires a bit of attention before you can use it. Please read the

accompanying information carefully ﬁ rst.

1. Don’t stare directly into the light or shine directly into the

eyes of another person as this may cause temporary loss of

vision.

2. Never disassemble the products, as all parts must be factory

serviced to insure proper operation.

3. Don’t interchange the parts inside this light with other prod-

ucts.

4. The LED light is to be mounted on the vehicle only in a verti-

cal, bottom mounting, or in a suspended position.

5. After turning on the light, the body might be hot enough to

warrant a burn risk. Be careful when you touch the body after

turning on the light for a long period of time.

6. Use the supplied wire harness for electrical installation.

7. The LED light must not adversely aﬀ ect the performance of

low beam, high beam, engine cooling or the driver’s view.

Qty: 2

Qty: 1

Qty: 2

Qty: 1

Qty: 2

LED Light

Two Light

Hex Head

Allen Key

Washer

Nylock Nut

MOUNTING

WIRING PART (M1)

PART (M5)

PART (M2) PART (M3)