Installation Instructions & User’s Manual VISIONXLIGHTING.
VISION X DURA-4: 1 FEATURES 1. Four 5-watt LED Produces 2,150 Lumens 2. Single Bolt mounting for easy & universal installation 3. High Pressure spray IP-69K waterproof XIL-OPR110 SERIES SPECIFICATIONS 1. Warranty : Extended 2. Housing Colors : Black 3. Amp Draw : 1.67A (12V) 4. Input Voltage : 9-32V 5. LED Lifespan : 50,000 Hours PREPARATION 1. We recommend completely reading instructions before installing. 2. Consult your local state regulatory agency regarding the use of LED lighting. 3.
DURA 4 1 LED Light Pod MOUNTING 4 Qty: 1 Allen Key (M8) PART (M5) Qty: 1 2 Pigtail WIRING 5 Qty: 1 3 Hex Head Bolt (M8) PART (M1) Qty: 1 Washer (M8) PART (M2) Qty: 1 WARNINGS As with many other high-tech products, this VISION X LED requires a bit of attention before you can use it. Please read the accompanying information carefully first. 1. Don’t stare directly into the light or shine directly into the eyes of another person as this may cause temporary loss of vision. 2.
VISION X MANUFACTURER RECOMMENDATION For those unfamiliar with electrical wiring on vehicles, Vision X recommends that all LED Lighting products are professionally installed. WIRING INSTALLATION 1. Disconnect your battery before instal. 2. Find the factory fog Light harness or an existing power source, to tap into. 3. Connect the positive (red) Pigtail wire to the positive wire of your previous wiring harness. Repeat this step for the negative Pigtail (black) wire as well. 4.
DURA 4 MOUNTING INSTALLATION 1. First, place the Light on the location where it will be mounted. Remember that it must be within reach of the harness. 2. Next determine where the (M8) bolt will be placed, and mark where the bolt locations will be. 3. Drill a hole for the (M8) bolt. 4. Place the Light over the hole, and slide the bolt through. Washer is then applied on the other end of the drilled hole followed by the bolt. 5. Tighten nut to desired tightness.
You May Also Be Interested In: Flush Mount Ideal for bumpers Part # - 4000322 Item # - XIL-SRECEIVER Tow Hitch Mount Pro Pods Available in multiple colors Part # - 9893372 Item # - XIL-C200 Clamp Tube Mount (0.75”-3.0” Diameter Available) VISIONXLIGHTING.
