VT5400 THUNDERBOLT™ 4 DOCK USER MANUAL
TABLE OF CONTENTS lntroduction ............................................................................ Features ................................................................................... Contents .................................................................................. Minimum System Requirements ........................................ Docking Station Configuration ........................................... Windows Setup ..............................................................
INTRODUCTION Your new Thunderbolt™ 4 Docking Station can connect to any host with Thunderbolt™ 3 or Thunderbolt™ 4 connector. Allowing you to connect up to two additional monitors through a single Thunderbolt™ 4 cable. The VT5400 is compatible with Intel based Mac Systems with Thunderbolt™ 3 and M1 equiped Mac Systems with Thunderbolt™ 4.
FEATURES • Compatible with Thunderbolt™ 4 Laptops and Desktop Computers • Supports 2 displays at resolutions up to 4K (3840 x 2160 @ 60Hz) • Supports Extend and Mirror Display Mode • Supports 5.1 Channel Surround Sound • Combo microphone input and audio output • SuperSpeed+ USB 3.1 Gen2 port up to 10Gbps • Built-in Gigabit Ethernet RJ45 for increased network performance • Power Delivery up to 80W over Thunderbolt™ 4 connection • SD 4.
MINIMUM SYSTEM REQUIREMENTS Computer Port OS PC With Thunderbolt™ 3 Windows 10 Mac with Thunderbolt™ 3 MacOS 11 Supported Performance System Max Resolution Supported Windows 10, 11 1 x 8K @ 30Hz (Extended) 2 x 4K @ 60Hz (Clonded or Extended) Mac (Intel) 1 x 4K @ 60Hz (Cloned or Extended) 2 x 4K @ 60Hz (Cloned or Extended) Mac (M1) 1 x 4K @ 60Hz (Cloned) Mac (M1 Pro, M1 Max) 1 x 4K @ 60Hz (Cloned or Extended) 2 x 4K @ 60Hz (Cloned or Extended) 4
DOCKING STATION CONFIGURATION Step 1 Ethernet USB-A 3.1 Gen 2 (10 Gbps) DisplayPort 1.4 HDMI 2.0 Power In PC Connect the power adapter to the VT5400 Docking Station. Connect the Thunderbolt™ 4 cable to the Thunderbolt™ 4 port on the side of the docking station. Plug the other end of the Thunderbolt™ 4 cable into your Laptop/Desktop Computer. Turn on the switch of the VT5400 supply.
DOCKING STATION CONFIGURATION (Continued) Step 2 Turn on the laptop, when the system shows the dialogue below please press “OK”. Step 3 When the system shows the below dialogue, please select “Always Connect” and press “OK” to finish the dock setup.
DOCKING STATION CONFIGURATION (Continued) Step 4 Connect displays and any additional peripherals to the VT5400 Thunderbolt™ 4 Docking Station.
WINDOWS SETUP (Audio) Audio setting for Windows 10 Step 1 Click the DisplayLink “Icon” at the lower right corner to set up audio and video, click “Audio setup” Step 2 Choose Speaker Step 3 Choose Microphone 8
WINDOWS SETUP (Video) Video Setting: Windows 10 Display mode • Click video setup • Select Display and choose Orientation then select Extend desktop to this display.
macOS SETUP (MANAGING MULTIPILE DISPLAYS) When a new display is connected to your Mac, it will default to being extended to the right of the main display. To configure the settings for each of your displays, select “Displays” from the “System Preferences” menu. This will open the “Display Preferences” window on each of your displays allowing you to configure each.
macOS SETUP (MANAGING MULTIPILE DISPLAYS) To arrange displays and configure mirrored or extended displays click on the arrangement tab. To move a display, click and drag the display in the arrangements window. To change primary display, click on the small bar on top of the main monitor and drag in onto the monitor you want to be the primary.
macOS SETUP (CONFIGURING DISPLAYS FROM THE MENU BAR) If you have checked the “Show Displays” ON menu bar in “Display Preferences” then you can configure the displays by clicking the display icon in the menu bar.
WARRANTY VisionTek Products LLC, (“VisionTek”) is pleased to warrant to the original purchaser (“Warrantee”) of the Device (“Product”), that the product will be free from manufacturing defects in material for Two (2) Years when given normal and proper usage. The product must be registered within 30 days from the original date of purchase to receive this 2 year warranty. All products not registered within 30 days will ONLY receive a 1 year limited warranty.
